Cutting Board

This is the place to post images of work produced using Aspire
Post Reply
Jozua
Vectric Wizard
Posts: 415
Joined: Wed Nov 19, 2008 7:28 pm
Model of CNC Machine: EZ-Router
Location: Bronkhorstspruit, South Africa

Cutting Board

Post by Jozua »

My wife asked for a cutting board and I decided to make this novelty item. I call it the reversible cutting board.

I used 12 mm Corian for the cutting board since it is food save and kind to knives unlike wood.

One side is for juicy meats etc. The other side is simply a normal flat surface. The insert can easily be removed for cleaning without exposing the wooden base to water.

The base is cut out of American Ash with a 6 mm deep pocket to prevent the Corian part from moving and also that it sits 6 mm proud of the wood.

Measurements are 300 mm x 400 mm for the Corian board and 350 mm x 450 mm for the base.

Joz
Attachments
CB -1.JPG
CB-2.JPG
CB Base.JPG

User avatar
mfirlott
Vectric Craftsman
Posts: 299
Joined: Thu Feb 07, 2013 12:49 am
Model of CNC Machine: Stinger 1 (2014)
Location: Cantley, Quebec, Canada
Contact:

Re: Cutting Board

Post by mfirlott »

Very nice design Joz. Well done. Will have to put that in my bank of "to do" jobs.
(Mitch)
CAMaster Stinger I
Vectric Aspire
Epilog 45watt Helix Laser

User avatar
dwilli9013
Vectric Wizard
Posts: 1237
Joined: Mon Sep 30, 2013 12:45 am
Model of CNC Machine: 3 axis Self Designed Self Built
Location: Machesney Park Illinois

Re: Cutting Board

Post by dwilli9013 »

Nice design and implementation. Previously had not thought of it that way. Hope the my wife doesn't see it or I will have to borrow your design. Thanks for sharing. :lol: :lol:
D-Dub
Dwayne
Dwilli

User avatar
mtylerfl
Vectric Archimage
Posts: 5865
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: Cutting Board

Post by mtylerfl »

I like that design, too. Very clever!
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

Samson
Vectric Wizard
Posts: 322
Joined: Fri May 02, 2014 10:14 pm
Model of CNC Machine: 4x4

Re: Cutting Board

Post by Samson »

I made one similar last year.
Unfortunately, Solid Surface materials are very hard on knives.
If one has a good steel, it's not a problem, but frequent use of SS will roll the edge of a blade.

Post Reply