Table Top Sign
-
dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: Table Top Sign
wow that is beautiful. What finishing technique did you use on this?
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli
-
Makingtoothpicks
- Vectric Wizard
- Posts: 520
- Joined: Tue Jul 23, 2013 8:46 pm
- Model of CNC Machine: Cncrouterparts CPR2448
- Location: Burien, Wa
- Contact:
Re: Table Top Sign
Can only echo "WOW"
-
highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
-
martin54
- Vectric Archimage
- Posts: 7352
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Table Top Sign
Again WOW !! That is an absolutely fantastic bit of work, thanks so much for sharing it with us 
-
joeporter
- Vectric Wizard
- Posts: 520
- Joined: Tue Jul 21, 2009 8:22 pm
- Model of CNC Machine: ShopBot Buddy Standard
- Location: Marietta, GA.
Re: Table Top Sign
That is so nice beautiful work!!....joe
-
ohiolyons
- Vectric Wizard
- Posts: 1711
- Joined: Wed May 27, 2009 7:16 pm
- Model of CNC Machine: Laguna IQ
- Location: Kettering, Ohio
Re: Table Top Sign
Thanks all!
This project took me to the next step with Aspire.
The wood is Walnut with a clear sprayed lacquer.
This double sided project was completed before Vectric made 2 sided simple. Version 9 is amazing.
The angled tenon was cut by CNC also.
Look at the base and see the saddle is angled also.
Front side 7 toolpaths 12 hours
Rear side 6 toolpaths 10 hours
Base 6 toolpaths 6 hours
This project took me to the next step with Aspire.
The wood is Walnut with a clear sprayed lacquer.
This double sided project was completed before Vectric made 2 sided simple. Version 9 is amazing.
The angled tenon was cut by CNC also.
Look at the base and see the saddle is angled also.
Front side 7 toolpaths 12 hours
Rear side 6 toolpaths 10 hours
Base 6 toolpaths 6 hours
John Lyons
CNC in Kettering, Ohio
CNC in Kettering, Ohio