LED Wall Light

This is the place to post images of work produced using Aspire
Post Reply
RebeccaJ
Vectric Staff
Posts: 338
Joined: Fri Jun 01, 2012 1:30 pm
Model of CNC Machine: Various
Location: Redditch, UK
Contact:

LED Wall Light

Post by RebeccaJ »

Hey All!

One of my favourite things in terms of home decor is LIGHTS... so I had a go at creating my own LED wall light! It's pretty simple and now that i've made it, i've done a lot of reflecting on it to make different variations! So watch this space for variations! The project is available for you to download from your V&Co account if you fancied creating your own version :)
Video:
Project: https://release.vectric.com/free-projec ... with-beki/

Happy Making!
Attachments
wall-light.jpg
20180312_145743.jpg
Beki
Senior Application Engineer - Vectric Ltd.

Savannahdan
Vectric Wizard
Posts: 520
Joined: Sun May 03, 2015 12:25 pm
Model of CNC Machine: Axiom AR8
Location: Savannah, GA

Re: LED Wall Light

Post by Savannahdan »

Beki: Great project and video! With a little modification it could also serve as a surround light for a dartboard. Thank you.

RebeccaJ
Vectric Staff
Posts: 338
Joined: Fri Jun 01, 2012 1:30 pm
Model of CNC Machine: Various
Location: Redditch, UK
Contact:

Re: LED Wall Light

Post by RebeccaJ »

Hey Savannahdan, Thank you :)
Great Idea! I love darts! I may just have to do that!!
Beki
Senior Application Engineer - Vectric Ltd.

User avatar
martin54
Vectric Archimage
Posts: 7339
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: LED Wall Light

Post by martin54 »

Here you go Rebecca if you want a variation :lol: :lol:
pb rooflight 2 colour.jpg

rmooreh
Posts: 13
Joined: Thu Nov 23, 2006 5:10 pm

Re: LED Wall Light

Post by rmooreh »

Were did you get the LED lights and remote for it?

Thanks

User avatar
gkas
Vectric Wizard
Posts: 1450
Joined: Sun Jan 01, 2017 3:39 am
Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
Location: Southern California

Re: LED Wall Light

Post by gkas »

I get all my LED Kits https://www.amazon.com/gp/product/B06XK ... UTF8&psc=1 at Amazom.

My big problem is the kit is cheaper than the sum of parts. So I use the electronics and a few feet of LED strip, then I have 12 feet of LEDs leftover. Right now I have 4 or 5 of these strips hanging around. :?

User avatar
martin54
Vectric Archimage
Posts: 7339
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: LED Wall Light

Post by martin54 »

rmooreh wrote:Were did you get the LED lights and remote for it?

Thanks
try a search on the forum as I am sure suppliers for LED's have been mentioned in some of the edge lit posts that have been made, lots of sellers on ebay but that can be a bit hit & miss as far as quality goes, commercial grade will be better but expect to pay a lot more for them, really depends what you want.
Sure there will be reasonable places that can be trusted on your side of the pond the same as there are in the UK :lol: :lol:

User avatar
mtylerfl
Vectric Archimage
Posts: 5865
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: LED Wall Light

Post by mtylerfl »

Fun project, Beki! I enjoyed the project video!
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

RebeccaJ
Vectric Staff
Posts: 338
Joined: Fri Jun 01, 2012 1:30 pm
Model of CNC Machine: Various
Location: Redditch, UK
Contact:

Re: LED Wall Light

Post by RebeccaJ »

Hey Martin, Wow that is something else! Lights everywhere :)
Rmooreh, I got the lights from Amazon (UK) https://www.amazon.co.uk/gp/product/B06 ... UTF8&psc=1
Michael T - Thank you :) I enjoyed making it :)
Beki
Senior Application Engineer - Vectric Ltd.

User avatar
martin54
Vectric Archimage
Posts: 7339
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: LED Wall Light

Post by martin54 »

Its a roof panel for a Party Bus Rebecca so need lots of lights :lol: :lol: Nearly 19 metres (62 feet) of LED Light strip altogether :lol: :lol:

Love the projects you are creating by the way, only thing you need to watch with battery operated LED's though is they tend to be a bit heavy on batteries :lol:

RebeccaJ
Vectric Staff
Posts: 338
Joined: Fri Jun 01, 2012 1:30 pm
Model of CNC Machine: Various
Location: Redditch, UK
Contact:

Re: LED Wall Light

Post by RebeccaJ »

Hey Martin,

Awesome, hey maybe my next project could be pimping a party bus! I'm sure all the Vectricians here would love that!
Thank you for your comments - very kind of you :)
Oh about the batteries...Yes I'm fully feeling that ... already got through a set! Haha!
Thanks,
Beki
Beki
Senior Application Engineer - Vectric Ltd.

User avatar
dwilli9013
Vectric Wizard
Posts: 1237
Joined: Mon Sep 30, 2013 12:45 am
Model of CNC Machine: 3 axis Self Designed Self Built
Location: Machesney Park Illinois

Re: LED Wall Light

Post by dwilli9013 »

Uh oh looks like we are getting Becki close to the edgelit arena. Welcome to your new addiction. :lol: :lol:
D-Dub
Dwayne
Dwilli

RebeccaJ
Vectric Staff
Posts: 338
Joined: Fri Jun 01, 2012 1:30 pm
Model of CNC Machine: Various
Location: Redditch, UK
Contact:

Re: LED Wall Light

Post by RebeccaJ »

Haha, yes it could well be! :):)
Beki
Senior Application Engineer - Vectric Ltd.

Post Reply