Christmas Nativity Scene

This is the place to post images of work produced using Aspire

Christmas Nativity Scene

Postby John Shorba » Thu Jan 11, 2018 3:41 am

I used two components from design and make and carved in mahogany on cnc shark hd4 extended bed. I finished it with shellac, glaze, and poly. My wife's Christmas present.
Attachments
IMG_20180104_134200_140.jpg
John Shorba
 
Posts: 2
Joined: Tue Jan 09, 2018 4:04 am
Model of CNC Machine: Shark HD4 ext

Re: Christmas Nativity Scene

Postby galerdude » Thu Jan 11, 2018 3:50 am

Beautiful! 8)
Regards,
Gale
User avatar
galerdude
Vectric Craftsman
 
Posts: 168
Joined: Sun Dec 12, 2010 7:39 am
Location: Spokane, WA USA
Model of CNC Machine: Joe's 4x4 Hybrid R&P Evolution

Re: Christmas Nativity Scene

Postby Leo » Thu Jan 11, 2018 1:46 pm

Fantastic job
Imagine the Possibilities of a Creative mind

www.leosworkshop.com
User avatar
Leo
Vectric Wizard
 
Posts: 2586
Joined: Sat Jul 14, 2007 3:02 am
Location: East Freetown, Ma.
Model of CNC Machine: 1300 x 1300 x 254

Re: Christmas Nativity Scene

Postby dwilli9013 » Thu Jan 11, 2018 2:13 pm

Very nice. I am sure it will be cherished. Thanks for sharing.
D-Dub
Dwayne
Dwilli
User avatar
dwilli9013
Vectric Wizard
 
Posts: 973
Joined: Mon Sep 30, 2013 12:45 am
Location: Machesney Park Illinois
Model of CNC Machine: 3 axis Self Designed Self Built

Re: Christmas Nativity Scene

Postby MarkJohnston » Thu Jan 11, 2018 3:53 pm

Very nice and the glaze brings out a lot of detail. What size is the piece?

Mark
MarkJohnston
Vectric Wizard
 
Posts: 774
Joined: Tue Jun 01, 2010 4:51 pm
Location: Prescott AZ
Model of CNC Machine: CAMaster MC4848

Re: Christmas Nativity Scene

Postby mtylerfl » Thu Jan 11, 2018 6:22 pm

Looks great! Did you use a 0.125" BN for the Finish Pass? Almost looks like more detail could be rendered with a 0.0625" BN

But, it's hard to tell from the photo. It is wonderful as it is!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
User avatar
mtylerfl
Vectric Wizard
 
Posts: 2971
Joined: Thu Jan 29, 2009 3:54 am
Location: Brunswick, GA
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha

Re: Christmas Nativity Scene

Postby John Shorba » Thu Jan 11, 2018 9:26 pm

Thanks for the kind words, it is 18" diameter and yes I did use an 1/8" ball nose. I previewed 1/16" and didn't see much difference and the run time was very long as it was so I thought the 1/8" was a good compromise.
John Shorba
 
Posts: 2
Joined: Tue Jan 09, 2018 4:04 am
Model of CNC Machine: Shark HD4 ext


Return to Aspire - Gallery

Who is online

Users browsing this forum: No registered users and 14 guests