Needed a mail sorter in the house (long story
) so went with a modified version of the Aspire project, "Mail Repository".
Same general main board only narrower and taller. And rather than have names on it, decided on some 3d carvings. Her and I know what they mean
All cherry wood, various pieces and sizes. All glued, no brads or screws.
1/8"em for the 3d rough @ 110
1/16"bn for the finish @ 75
60 V-bit for the V-carve @ 100
1/4"em for the cut out @ 80
Router speed @ 5 to 5.5 out of 6 on all procedures.