re-purposed oak michigan carve
-
- Vectric Wizard
- Posts: 1687
- Joined: Sun Oct 24, 2010 7:28 pm
- Model of CNC Machine: homebuilt 4'x2' (Mach3+G540)
- Location: Guelph, Ontario
- Contact:
Re: re-purposed oak michigan carve
Nice clean cuts, and an elegant design too! I love it when folks repurpose from 'junk'.
Paul Rowntree
WarpDriver, StandingWave, Topo and gadgets available at PaulRowntree.weebly.com
WarpDriver, StandingWave, Topo and gadgets available at PaulRowntree.weebly.com
-
- Vectric Wizard
- Posts: 520
- Joined: Sun May 03, 2015 12:25 pm
- Model of CNC Machine: Axiom AR8
- Location: Savannah, GA
Re: re-purposed oak michigan carve
Really nice. You sort of have a frame with the way you cut the outside. You've reminded me that I need to use the shellac for a sealing coat before carving some projects. Thank you.
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: re-purposed oak michigan carve
Very nice I also many many times go into full blown salvage mode. Really irritates the wife when we are going down the road and I have to stop to throw an old dresser or something into the back of my truck. But hey beats going in the landfill and it helps feed my wood addiction.
What font is that you used. Very elegant.
What font is that you used. Very elegant.
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli
- SteveNelson46
- Vectric Wizard
- Posts: 2282
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: re-purposed oak michigan carve
This is exceptionally nice. Especially since you used reclaimed wood.
Steve
- Leo
- Vectric Wizard
- Posts: 4082
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: re-purposed oak michigan carve
Very nice indeed
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
- gmann65
- Posts: 6
- Joined: Fri Mar 31, 2017 7:47 pm
- Model of CNC Machine: excitect 5' x 10' bed
- Location: Caseville,Michigan
Re: re-purposed oak michigan carve
Thanks everyone for the compliments!
dwilli9013:
The font is called Blacksword.
was wondering if you could give me a few pointers on a 3d book I have modeled. Followed one of the tutorials on the panther model. I have tool paths and everything (I think) to hit the go button, but this really scares me lol
dwilli9013:
The font is called Blacksword.
was wondering if you could give me a few pointers on a 3d book I have modeled. Followed one of the tutorials on the panther model. I have tool paths and everything (I think) to hit the go button, but this really scares me lol
- gmann65
- Posts: 6
- Joined: Fri Mar 31, 2017 7:47 pm
- Model of CNC Machine: excitect 5' x 10' bed
- Location: Caseville,Michigan
Re: re-purposed oak michigan carve
PaulRowntree most of my projects are done this way. If I need something I just go see the Amish and have them cut what ever I need for better quality wood.PaulRowntree wrote:Nice clean cuts, and an elegant design too! I love it when folks repurpose from 'junk'.
- mtylerfl
- Vectric Archimage
- Posts: 5865
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: re-purposed oak michigan carve
Outstanding work all around! Congrats!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- mikeacg
- Vectric Wizard
- Posts: 659
- Joined: Sun Nov 02, 2008 10:53 pm
- Model of CNC Machine: Camaster Stinger, Sidewinder, SB 4x4
- Location: Newberry, MI
- Contact:
Re: re-purposed oak michigan carve
Not sure how I missed seeing this one earlier but I have to say I really like it!
Welcome to the forum and the world of CNC! If you get to the UP, give a shout out!
Mike
Welcome to the forum and the world of CNC! If you get to the UP, give a shout out!
Mike
- Creation in Wood
- Vectric Wizard
- Posts: 856
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
- gmann65
- Posts: 6
- Joined: Fri Mar 31, 2017 7:47 pm
- Model of CNC Machine: excitect 5' x 10' bed
- Location: Caseville,Michigan
Re: re-purposed oak michigan carve
Will do, I get up there a couple times a year.mikeacg wrote:Not sure how I missed seeing this one earlier but I have to say I really like it!
Welcome to the forum and the world of CNC! If you get to the UP, give a shout out!
Mike
Must not be able to message people I take it?
- mikeacg
- Vectric Wizard
- Posts: 659
- Joined: Sun Nov 02, 2008 10:53 pm
- Model of CNC Machine: Camaster Stinger, Sidewinder, SB 4x4
- Location: Newberry, MI
- Contact:
Re: re-purposed oak michigan carve
I think you need a certain number of posts to do that. Let me try it from this end!