Acrylic push thru letter sign/led lit

This is the place to post images of work produced using Aspire
Post Reply
User avatar
customquint
Vectric Craftsman
Posts: 240
Joined: Tue Jan 25, 2011 4:18 am
Model of CNC Machine: AXYZ
Location: Piqua, OH
Contact:

Acrylic push thru letter sign/led lit

Post by customquint »

Just finished this install today.

. 5" acrylic on brushed metal dibond, with. Is tomorrow slim cabinet for the LEDs. Power supplies bidding above ceiling.
20171017_140743.jpg
20171017_140756.jpg

Mobius
Vectric Wizard
Posts: 413
Joined: Wed Jul 09, 2014 1:19 am
Model of CNC Machine: CRP Pro 4848 Custom Build
Location: Drumheller, Alberta, Canada
Contact:

Re: Acrylic push thru letter sign/led lit

Post by Mobius »

Yes! Love it!
Connor Bredin
Distinctive Dimensional Concepts Ltd.
www.distinctive-concepts.ca

User avatar
dwilli9013
Vectric Wizard
Posts: 1237
Joined: Mon Sep 30, 2013 12:45 am
Model of CNC Machine: 3 axis Self Designed Self Built
Location: Machesney Park Illinois

Re: Acrylic push thru letter sign/led lit

Post by dwilli9013 »

Nice came out quite well. Thanks for sharing.
D-Dub
Dwayne
Dwilli

User avatar
dwilli9013
Vectric Wizard
Posts: 1237
Joined: Mon Sep 30, 2013 12:45 am
Model of CNC Machine: 3 axis Self Designed Self Built
Location: Machesney Park Illinois

Re: Acrylic push thru letter sign/led lit

Post by dwilli9013 »

Nice came out quite well. Thanks for sharing.
D-Dub
Dwayne
Dwilli

User avatar
adze_cnc
Vectric Wizard
Posts: 4303
Joined: Sat Jul 27, 2013 10:08 pm
Model of CNC Machine: AXYZ 4008
Location: Vancouver, BC, Canada

Re: Acrylic push thru letter sign/led lit

Post by adze_cnc »

What is a "push through letter"?

User avatar
customquint
Vectric Craftsman
Posts: 240
Joined: Tue Jan 25, 2011 4:18 am
Model of CNC Machine: AXYZ
Location: Piqua, OH
Contact:

Re: Acrylic push thru letter sign/led lit

Post by customquint »

adze_cnc wrote:What is a "push through letter"?
It's when you make acrylic letters that have a flange on the bottom that goes through an opaque sign substrate.
Use the flange to mount to the back side.

You can make the acrylic letters two ways.

This job we took .5" acrylic and milled down .375" around all the letters so we could install all the letters as one piece.

You can also use two layers of acrylic and bond the cut letters to a piece you are using and a flange.

Goal is to have the letter stick out further than the face, this sign they stick out about .25"

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Acrylic push thru letter sign/led lit

Post by highpockets »

Looks really good, thanks for sharing.
John
Maker of Chips

Post Reply