Fender Stat Build

This is the place to post images of work produced using Aspire
CarveOne
Vectric Wizard
Posts: 1479
Joined: Sun Nov 28, 2010 5:10 pm
Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
Location: Eastern NC, USA

Re: Fender Stat Build

Post by CarveOne »

Do a Google search for: Stratocaster guitar body + DXF drawing

You will find lots of images and info. :D

CarveOne
CarveOne
http://www.carveonecncwoodcraft.com

Crosetti
Posts: 23
Joined: Mon Aug 05, 2013 7:54 pm
Model of CNC Machine: work: Camaster Stinger III / home: Shark
Location: Camarillo, CA

Re: Fender Stat Build

Post by Crosetti »

The file I used
The file I used
Rick Hubka wrote:Fantastic Strat Build!

Can you tell us where you got your strat body cut file. I don't mind paying for one as apposed to a hundred hours of my time to learn to make one poorly. :D

You can find tons of Strat copy guitars around for a hundred bucks but nothing beats saying you built it yourself!

Rick
Thanks Rick. I googled Stratocaster Plans or something like that & chose one that had the pocket depths. Then brought it into my CAD program, scaled it then traced it.
I'll attach the cut file I made (note: I didn't use these bridge holes & the bridge profile was a hair too long)...
Guitar - Shark.crv3d
(1.81 MiB) Downloaded 346 times
...& I must say that my hours of of screwing up then learning what went wrong was half the fun ... it's the journey

Rick Hubka
Posts: 19
Joined: Sat Sep 26, 2009 5:29 pm
Model of CNC Machine: Joe's 4x4 Hybrid R&P Evolution
Location: Chemainus, BC, Canada

Re: Fender Stat Build

Post by Rick Hubka »

Thank you so much for the file!
I'm sure a few of us here will make use of it.
For me I am looking at my stash of 2" maple and will be carving soon.
I've thought of it for years and it takes someone like you to do it and kick my butt.
For my first I'll buy the semi finished neck too. The natural finish on yours is awesome.
I'll keep you posted.

User avatar
dwilli9013
Vectric Wizard
Posts: 1237
Joined: Mon Sep 30, 2013 12:45 am
Model of CNC Machine: 3 axis Self Designed Self Built
Location: Machesney Park Illinois

Re: Fender Stat Build

Post by dwilli9013 »

Thank you for sharing the file. This looks like a fun project to undertake with my nephew. Just need to get the CNC back in action now. :lol: :lol: :lol:
D-Dub
Dwayne
Dwilli

Rick Hubka
Posts: 19
Joined: Sat Sep 26, 2009 5:29 pm
Model of CNC Machine: Joe's 4x4 Hybrid R&P Evolution
Location: Chemainus, BC, Canada

Re: Fender Stat Build

Post by Rick Hubka »

I've been checking out neck and parts prices for building a Strat. A genuine Fender Strat neck with logo is like $500. I think the logo sticker on it costs 400.
Then there is the good parts and kits from http://www.stewmac.com/
But...
Yes I know the china stuff is made cheap and it takes a long time to ship. But...
$27 for a finished maple strat neck with free shipping! They have Belcat pickups there which are fair quality.
https://www.aliexpress.com/store/147457 ... 724aUOP74u

$27... Why would I make one?

Stickman
Vectric Craftsman
Posts: 225
Joined: Fri May 22, 2009 5:20 pm
Model of CNC Machine: Legacy Arty 58
Location: El Sobrante, California

Re: Fender Stat Build

Post by Stickman »

Nice finish. I have a natural Strat I bought many years ago. One thing that distinguished Stratocasters from Les Pauls or Fender Telecasters was the contoured body shape, not flat topped. That, of course, adds more work (and cost) to the original. That might be a project for someone to figure out in Aspire.

Crosetti
Posts: 23
Joined: Mon Aug 05, 2013 7:54 pm
Model of CNC Machine: work: Camaster Stinger III / home: Shark
Location: Camarillo, CA

Re: Fender Stat Build

Post by Crosetti »

Rick Hubka wrote:I've been checking out neck and parts prices for building a Strat. A genuine Fender Strat neck with logo is like $500. I think the logo sticker on it costs 400.
Then there is the good parts and kits from http://www.stewmac.com/
But...
Yes I know the china stuff is made cheap and it takes a long time to ship. But...
$27 for a finished maple strat neck with free shipping! They have Belcat pickups there which are fair quality.
https://www.aliexpress.com/store/147457 ... 724aUOP74u

$27... Why would I make one?
I knew absolutely zero about guitars & was gonna go with name brand parts. I bought everything needed (besides a neck) at a guitar store to the tune of $400.
Went home & found all that I bought plus a neck on Amazon for $70. I lost the receipt from the guitar center but they let me return everything with no hassle.
Yes they are cheap parts, but this is for a 13yr old who is just learning.
Add that to the fact that I didn't even know how or if it would turn out, the expensive stuff seemed like just a waste of $$.

Crosetti
Posts: 23
Joined: Mon Aug 05, 2013 7:54 pm
Model of CNC Machine: work: Camaster Stinger III / home: Shark
Location: Camarillo, CA

Re: Fender Stat Build

Post by Crosetti »

Stickman wrote: One thing that distinguished Stratocasters from Les Pauls or Fender Telecasters was the contoured body shape, not flat topped. That, of course, adds more work (and cost) to the original. That might be a project for someone to figure out in Aspire.
We contoured it a bit but nothing like the strats have, more like rounding it off. It was a sanding workout for the boy...lol.

User avatar
dwilli9013
Vectric Wizard
Posts: 1237
Joined: Mon Sep 30, 2013 12:45 am
Model of CNC Machine: 3 axis Self Designed Self Built
Location: Machesney Park Illinois

Re: Fender Stat Build

Post by dwilli9013 »

$27... Why would I make one?[/quote]

Because you can......... :lol: :lol: :lol:
D-Dub
Dwayne
Dwilli

Rick Hubka
Posts: 19
Joined: Sat Sep 26, 2009 5:29 pm
Model of CNC Machine: Joe's 4x4 Hybrid R&P Evolution
Location: Chemainus, BC, Canada

Re: Fender Stat Build

Post by Rick Hubka »

Because you can......... :lol: :lol: :lol:
Ya... I hear ya. That's the answer I give people when they ask "Why are you building your old german shepherd a dog elevator".
Should be done in a few weeks. Using an electric hoist and arduino's for controls.
elevator.jpg

Crosetti
Posts: 23
Joined: Mon Aug 05, 2013 7:54 pm
Model of CNC Machine: work: Camaster Stinger III / home: Shark
Location: Camarillo, CA

Re: Fender Stat Build

Post by Crosetti »

Dog Elevator! That's Awesome!!

User avatar
dwilli9013
Vectric Wizard
Posts: 1237
Joined: Mon Sep 30, 2013 12:45 am
Model of CNC Machine: 3 axis Self Designed Self Built
Location: Machesney Park Illinois

Re: Fender Stat Build

Post by dwilli9013 »

Rick Hubka wrote:
Because you can......... :lol: :lol: :lol:
Ya... I hear ya. That's the answer I give people when they ask "Why are you building your old german shepherd a dog elevator".
Should be done in a few weeks. Using an electric hoist and arduino's for controls.
elevator.jpg
Very Nice be sure and post up the finished product. That is cool. :lol: :lol:
D-Dub
Dwayne
Dwilli

Post Reply