Wedding Gift Wine Caddy

This is the place to post images of work produced using Aspire

Wedding Gift Wine Caddy

Postby dwilli9013 » Mon Oct 09, 2017 4:50 pm

Well another wine caddy has been released into the wild.
This one done in Aspen. I try to change the finish up on every one of these I do and I believe this is my favorite thus far.
Used Antique Oil Finish on this one 4 coats with 24 hour cure in between each coat. This did not come out overly shiny as the others done in poly but it has a fantastic silky feel to it.
Thanks for looking
Dwayne
Attachments
Pat Caddy.jpg
Pat Caddy 2.jpg
D-Dub
Dwayne
Dwilli
User avatar
dwilli9013
Vectric Wizard
 
Posts: 831
Joined: Mon Sep 30, 2013 12:45 am
Location: Machesney Park Illinois
Model of CNC Machine: 3 axis Self Designed Self Built

Re: Wedding Gift Wine Caddy

Postby Mike-S » Mon Oct 09, 2017 5:18 pm

Came out great. The finish is perfect for that holder. They'll love it.
Looks like aspen carves well.
User avatar
Mike-S
Vectric Wizard
 
Posts: 953
Joined: Mon Jun 13, 2011 6:45 am
Location: Hayesville, NC
Model of CNC Machine: Joe's Hybrid 4x4 (but 3x3)

Re: Wedding Gift Wine Caddy

Postby dealguy11 » Mon Oct 09, 2017 5:29 pm

That is quite nice. The carving came out beautifully detailed.
Steve Godding
D&S Artistic Woodworking http://www.dsartisticwood.com
User avatar
dealguy11
Vectric Wizard
 
Posts: 1150
Joined: Tue Sep 22, 2009 9:52 pm
Location: Henryville, PA
Model of CNC Machine: Anderson Selexx 510

Re: Wedding Gift Wine Caddy

Postby dwilli9013 » Mon Oct 09, 2017 5:38 pm

Thanks both of you.
Yes Aspen carves quite well you just have to brush the fuzzies with and stiff bristle brush and watch the bit speeds it will burn in a pair of seconds.
.03 rad tapered ball nose brings out the detail quite nice but does add the time. Worth the trade off as I am not doing production runs on these. :lol: :lol: :lol:
D-Dub
Dwayne
Dwilli
User avatar
dwilli9013
Vectric Wizard
 
Posts: 831
Joined: Mon Sep 30, 2013 12:45 am
Location: Machesney Park Illinois
Model of CNC Machine: 3 axis Self Designed Self Built

Re: Wedding Gift Wine Caddy

Postby highpockets » Mon Oct 09, 2017 6:04 pm

Nice job Dwayne....

Great wedding gift, does it come with a bottle of wine and glasses :D :D :D
John
Maker of Chips
User avatar
highpockets
Vectric Wizard
 
Posts: 1286
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Wedding Gift Wine Caddy

Postby mtylerfl » Mon Oct 09, 2017 6:05 pm

Beautiful job!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
User avatar
mtylerfl
Vectric Wizard
 
Posts: 2446
Joined: Thu Jan 29, 2009 3:54 am
Location: Brunswick, GA
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha

Re: Wedding Gift Wine Caddy

Postby dwilli9013 » Mon Oct 09, 2017 6:26 pm

highpockets wrote:Nice job Dwayne....

Great wedding gift, does it come with a bottle of wine and glasses :D :D :D


Why yes it does John, but that was supplied by the person giving it as a gift. :lol: :lol: :lol:
D-Dub
Dwayne
Dwilli
User avatar
dwilli9013
Vectric Wizard
 
Posts: 831
Joined: Mon Sep 30, 2013 12:45 am
Location: Machesney Park Illinois
Model of CNC Machine: 3 axis Self Designed Self Built

Re: Wedding Gift Wine Caddy

Postby jwbyers » Mon Oct 09, 2017 6:58 pm

Looks very nice! Good finish, very detailed. What bit did you use for the "Established Oct 6, 2017"? Looks really tight in there.
jwbyers
Vectric Apprentice
 
Posts: 1
Joined: Tue Jul 16, 2013 2:58 pm
Model of CNC Machine: CNC Shark Black Diamond Edition

Re: Wedding Gift Wine Caddy

Postby SteveNelson46 » Mon Oct 09, 2017 7:50 pm

I LIKE it. Did you design it or is the pattern available?
Steve
User avatar
SteveNelson46
Vectric Craftsman
 
Posts: 180
Joined: Wed Jan 04, 2012 2:43 pm
Location: Tucson, Az.
Model of CNC Machine: Carvewright

Re: Wedding Gift Wine Caddy

Postby dwilli9013 » Mon Oct 09, 2017 7:53 pm

jwbyers wrote:Looks very nice! Good finish, very detailed. What bit did you use for the "Established Oct 6, 2017"? Looks really tight in there.


Thank you I used an Amana Tools Carbide insert bit Engraving - 30 Deg Tip 0.02 Flat- 0.25 inche shank. These are my go to bit for tight areas. For extreme detail I will go with an 1/8 inch 60° v-bit.
D-Dub
Dwayne
Dwilli
User avatar
dwilli9013
Vectric Wizard
 
Posts: 831
Joined: Mon Sep 30, 2013 12:45 am
Location: Machesney Park Illinois
Model of CNC Machine: 3 axis Self Designed Self Built

Re: Wedding Gift Wine Caddy

Postby dwilli9013 » Mon Oct 09, 2017 7:58 pm

SteveNelson46 wrote:I LIKE it. Did you design it or is the pattern available?


Thank you. The plaque outline is an Vectric clipart in Aspire as are the grapes and the flourish around the last name. all I added was a 2 rail sweep around the glass holder slot and a 2 rail sweep around the bottle hole.

Then my final toolpath is to cut the slots for the glass holders and the hole for the bottle neck. Brand it and send it on its way. :lol: :lol: :lol:
D-Dub
Dwayne
Dwilli
User avatar
dwilli9013
Vectric Wizard
 
Posts: 831
Joined: Mon Sep 30, 2013 12:45 am
Location: Machesney Park Illinois
Model of CNC Machine: 3 axis Self Designed Self Built


Return to Aspire - Gallery

Who is online

Users browsing this forum: Yahoo [Bot] and 8 guests