A little table I experimented with.

This is the place to post images of work produced using Aspire
Post Reply
redwood
Vectric Wizard
Posts: 301
Joined: Wed Apr 13, 2016 3:38 am
Model of CNC Machine: Axiom Pro6
Location: No. Calif.

A little table I experimented with.

Post by redwood »

I needed a small end table for my deck. I decided to cut all the pieces on my CNC, just to see if I could. The VCarve in the top is filled with epoxy putty.
Stained2.jpg
Stained1.jpg
Mark
Pioneer, CA

Rick O.
Vectric Craftsman
Posts: 250
Joined: Mon Jul 18, 2011 7:54 pm
Model of CNC Machine: CNC router
Location: Houston, Texas

Re: A little table I experimented with.

Post by Rick O. »

Very nice!
RickO

User avatar
kp91
Vectric Apprentice
Posts: 77
Joined: Thu Jun 09, 2016 3:33 pm
Model of CNC Machine: Digital Wood Carver
Location: Fredericksburg, Virginia

Re: A little table I experimented with.

Post by kp91 »

That is pretty snazzy!

I may have to deconstruct your design and try to adapt it to an interior project.

Is it a half lap and floating tenons?

Great inspiration!
Doug
1 John 1:9
Fredericksburg, VA

redwood
Vectric Wizard
Posts: 301
Joined: Wed Apr 13, 2016 3:38 am
Model of CNC Machine: Axiom Pro6
Location: No. Calif.

Re: A little table I experimented with.

Post by redwood »

Actually, it is all floating tenons, except some 1x supports on the underside..
Mark
Pioneer, CA

Jane Ndungu
Vectric Craftsman
Posts: 201
Joined: Fri Oct 31, 2014 8:14 am
Model of CNC Machine: TS1325

Re: A little table I experimented with.

Post by Jane Ndungu »

Hi,
This is very very beautiful, mind sharing how its done or the Crv files.
Will appreciate any help

Regards
Jane

User avatar
Creation in Wood
Vectric Wizard
Posts: 856
Joined: Thu May 28, 2015 8:58 pm
Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
Location: Monument, Colorado USA

Re: A little table I experimented with.

Post by Creation in Wood »

Very nice table.
Thank You
Doug

User avatar
Jerry In Maine
Vectric Wizard
Posts: 342
Joined: Tue Jun 26, 2007 2:46 am
Model of CNC Machine: CNC Router Parts CRP4848
Location: Surry, Maine USA

Re: A little table I experimented with.

Post by Jerry In Maine »

Id like to know more about the epoxy putty design. Do you make the putty or buy it?
I'm just a number in a great design

Post Reply