Paradise Box Hybrid

This is the place to post images of work produced using Aspire
Post Reply
User avatar
dwilli9013
Vectric Wizard
Posts: 1237
Joined: Mon Sep 30, 2013 12:45 am
Model of CNC Machine: 3 axis Self Designed Self Built
Location: Machesney Park Illinois

Paradise Box Hybrid

Post by dwilli9013 »

Well I am hoping this rendition of Michael's Paradise Box gets me into the Paradise Box club.
One of my co workers requested a box for his wifes business which she could use as a raffle box. The original PB came to mind that fit the bill perfectly. Just added the acrylic front panel and lit her up. Also scaled the whole thing up to a larger size interior dimensions of the box are now 10" x 9" x 6" deep. Material is all 3/4 Appalachian Cherry. 3/8" thick Acrylic for the front panel. Lighting was done with a Harbour Freight under cabinet LED strip light. 3 modes of operation dim lit, bright light & flashing bright.
The lid was not hinged as I keyed this so that she could take the top off and remove the entries. The black tape on the acrylic in the front is to stop the light from blowing up through the cracks of the lid.
All panels were v-bit engraved with her companies logo and her signature.
finish was simply 4 coats of Hellmans poly semi gloss with light sand 400 grit between coats. She is going to send it back to me after her first show this wednesday for a couple of coats of Bri Wax.
Fun project just a bit tighter timeline than I would have liked.
Hopefully I will be allowed entrance into the Paradise Box Club.
Attachments
20170917_181202.jpg
20170917_181211.jpg
20170917_181537.jpg
20170917_181525.jpg
20170917_181517.jpg
lid open.jpg
D-Dub
Dwayne
Dwilli

User avatar
mtylerfl
Vectric Archimage
Posts: 5864
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: Paradise Box Hybrid

Post by mtylerfl »

WOW, Dwayne! I really like this version you created - beautiful work and unique from all others!
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

User avatar
dwilli9013
Vectric Wizard
Posts: 1237
Joined: Mon Sep 30, 2013 12:45 am
Model of CNC Machine: 3 axis Self Designed Self Built
Location: Machesney Park Illinois

Re: Paradise Box Hybrid

Post by dwilli9013 »

mtylerfl wrote:WOW, Dwayne! I really like this version you created - beautiful work and unique from all others!
Thank you Michael, Kind words from the grandmaster himself. :lol: :lol: :lol: :lol: :lol:
D-Dub
Dwayne
Dwilli

User avatar
martin54
Vectric Archimage
Posts: 7332
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: Paradise Box Hybrid

Post by martin54 »

Fantastic job Dwayne but I bet you didn't charge enough for it :lol: :lol:

Only criticism is the black tape, sure you could have come up with something a bit better than a couple of bits of sticky tape, a thin veneer strip across the full length of the acrylic panel maybe :lol: :lol: :lol:

User avatar
dwilli9013
Vectric Wizard
Posts: 1237
Joined: Mon Sep 30, 2013 12:45 am
Model of CNC Machine: 3 axis Self Designed Self Built
Location: Machesney Park Illinois

Re: Paradise Box Hybrid

Post by dwilli9013 »

You are correct Martin I did not charge enough for it but my reasoning was there is definitely more jobs in the pipe on this one as I shared my portfolio with them and they are already picking things out.

I agree on the black tap application I wasnt thinking I could have run velcro cloth side along the right and left edges of the top which would have served two purposes one to center the top and two to block the light.
But hey that's what its all about is learn a little with each build. Plus I did not see all of your examples on FB until last night. Really really like the weave pattern. :lol: :lol: :lol:
D-Dub
Dwayne
Dwilli

User avatar
martin54
Vectric Archimage
Posts: 7332
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: Paradise Box Hybrid

Post by martin54 »

Dwayne, have a search on the forum, the weave pattern is not mine as I said on my page, CarveOne very kindly shared the weave file some time ago on this forum :lol: :lol: :lol:

The only problem with your reasoning (& I speak from experience) is that they may now expect all the future work to be at the same low rate so you just end up being a busy fool :lol: :lol: :lol:

User avatar
Creation in Wood
Vectric Wizard
Posts: 856
Joined: Thu May 28, 2015 8:58 pm
Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
Location: Monument, Colorado USA

Re: Paradise Box Hybrid

Post by Creation in Wood »

Nice looking project
Thank You
Doug

armbrusterco
Vectric Craftsman
Posts: 128
Joined: Tue Feb 14, 2012 5:26 am
Model of CNC Machine: Roland MDX-40A
Location: Lake Barrington, IL
Contact:

Re: Paradise Box Hybrid

Post by armbrusterco »

The lighting is a great touch and you implemented it well. Congrats!
Bob Armbruster
www.ArmbrusterCo.com

Post Reply