Growth Ruler
Posted: Mon Sep 11, 2017 2:08 pm
Quick little project I ran off for my Niece's birthday. She has two boys who are growing like weeds and wanted to get it in the house instead of scribing marks on the garage wall.
This actually took longer to finish than it did to cut.
Material 3/4 x 8" x 78" lg Maple
90° V-Bit for all cuts fluting and lettering.
two shellac sealer coats Marsh Spray Ink then sand to bring back the edges.
Finished with 3 coats brush on poly light sand 220 between coats.
Fun little project. And the first time I got to use a tiling toolpath on my machine. Went smooth as silk. I will definitely utilize this more often.
This actually took longer to finish than it did to cut.
Material 3/4 x 8" x 78" lg Maple
90° V-Bit for all cuts fluting and lettering.
two shellac sealer coats Marsh Spray Ink then sand to bring back the edges.
Finished with 3 coats brush on poly light sand 220 between coats.
Fun little project. And the first time I got to use a tiling toolpath on my machine. Went smooth as silk. I will definitely utilize this more often.