simple plywood storage box--dovetail

This is the place to post images of work produced using Aspire
Post Reply
stankern
Posts: 669
Joined: Tue Nov 27, 2007 3:21 pm
Location: ontario canada

simple plywood storage box--dovetail

Post by stankern »

This project was ideal to show the dovetail gadget in aspire 8.5 ,
then the whole project was imported into
aspire 9.0
The dovetail gadget did not work in aspire 9.0
I was amazed how well this went and went together , its a strong box
and no glue was used
Also this project is ideal for a 4x8 CNC table

Attachments
net1.jpg
net2.jpg
net3.jpg
net4.jpg

PaulRowntree
Vectric Wizard
Posts: 1687
Joined: Sun Oct 24, 2010 7:28 pm
Model of CNC Machine: homebuilt 4'x2' (Mach3+G540)
Location: Guelph, Ontario
Contact:

Re: simple plywood storage box--dovetail

Post by PaulRowntree »

How did the gadget not work in 9.0?
Several of my gadgets failed in A9.008, but subsequent versions were fine.
Paul Rowntree
WarpDriver, StandingWave, Topo and gadgets available at PaulRowntree.weebly.com

stankern
Posts: 669
Joined: Tue Nov 27, 2007 3:21 pm
Location: ontario canada

Re: simple plywood storage box--dovetail

Post by stankern »

it would not pick up, used aspire 8.5 then used aspire 9.00 to finish off

User avatar
martin54
Vectric Archimage
Posts: 7332
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: simple plywood storage box--dovetail

Post by martin54 »

Are you using the latest update for Aspire 9 Stan ??

stankern
Posts: 669
Joined: Tue Nov 27, 2007 3:21 pm
Location: ontario canada

Re: simple plywood storage box--dovetail

Post by stankern »

yes 9.010

Post Reply