Hi All,
Im going to start making a few youtube videos focusing on CNC work, I thought id post my first one up here as well. Please let me know if this is not appropriate for the forum
It a Game of Throne House Stark Direwolf - Im not trying to sell these its just to try and generate a little bit of attention for my new channel and hopefully drive some business to my website
The Youtube vidoe is
Let me know what you think, If i were to make something like this again id definitely make a few changes... id make sure the base height was a little bigger and probably add a profile cut to the model with a small end mill....
House Stark Direwolf
- weirdbeard
- Posts: 33
- Joined: Thu Sep 15, 2016 2:23 pm
- Model of CNC Machine: Jcut
- Location: Perth, Western Australia
- Contact:
- ChrisInEstes
- Vectric Wizard
- Posts: 841
- Joined: Fri Jul 17, 2009 8:00 pm
- Model of CNC Machine: Vytek 4' X 8' - Perske Spindle - Mach3
- Location: Estes Park, Colorado, USA
Re: House Stark Direwolf
Nice work... all the way around! I subscribed.
Chris
Chris
Aspire 9.5 - FlexiEXPERT 11 - Vytek Rebel 4' x 8' - 5HP Perske Spindle
Re: House Stark Direwolf
Very Nice Job!!! I too subscribed. Hope your channel takes off. Your quality of workmanship is excellent.
- weirdbeard
- Posts: 33
- Joined: Thu Sep 15, 2016 2:23 pm
- Model of CNC Machine: Jcut
- Location: Perth, Western Australia
- Contact:
Re: House Stark Direwolf
Thanks Guys - Its really nice to get some positive feed back.
- Mark's Wood Chips
- Vectric Craftsman
- Posts: 201
- Joined: Thu Mar 19, 2015 12:36 pm
- Model of CNC Machine: ShopSabre 23 with Rotary
- Location: Hubertus, WI 53033
- Contact:
Re: House Stark Direwolf
Very nice work! Where did you get the direwolf model?
Mark
Mark
- weirdbeard
- Posts: 33
- Joined: Thu Sep 15, 2016 2:23 pm
- Model of CNC Machine: Jcut
- Location: Perth, Western Australia
- Contact:
Re: House Stark Direwolf
Hi Mark, I found it on CGTrader
- Creation in Wood
- Vectric Wizard
- Posts: 856
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
-
- Vectric Apprentice
- Posts: 63
- Joined: Mon Sep 19, 2016 8:45 am
- Model of CNC Machine: bravoprodigy be3030
Re: House Stark Direwolf
hi mate nice video of your work those clamps for joining the planks where can i bye them i live in south australia??? cheers frank
- weirdbeard
- Posts: 33
- Joined: Thu Sep 15, 2016 2:23 pm
- Model of CNC Machine: Jcut
- Location: Perth, Western Australia
- Contact:
Re: House Stark Direwolf
Hi Frank
Well I actually made these Clamps.
You can find them in Carbatec but they are pricey... although i guess it depends on what you consider pricey!! haha
https://www.carbatec.com.au/clamping-vi ... glue-press
let me know how you go. If you dont want to pay that much and dont want to make any I might make another set....
Well I actually made these Clamps.
You can find them in Carbatec but they are pricey... although i guess it depends on what you consider pricey!! haha
https://www.carbatec.com.au/clamping-vi ... glue-press
let me know how you go. If you dont want to pay that much and dont want to make any I might make another set....