Latest sign I made for my sisters back porch.
Material: Poplar
Dims: 14" x 10" x 3/4"
Paints: Acrylic
Lettering is gold but hard to see in picture.
Rough pass with 1/4 ballnose
Finish pas with .0625 tapered ballnose.
Due to not having my toolpaths dialed in properly this was a 51 hour cut all combined. and due to my mistakes the third board was the charm.
Finish was 2lb cut of shellac for initial seal the 50/50 cut with Denatured alcohol for subsequent coats. Final 2 coats rattle can poly.
Fun little project whilst learning a few things along the way.
Porch Sign
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Porch Sign
That's a cute sign. Your sister will enjoy it for years to come!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Posts: 19
- Joined: Sat Sep 26, 2009 5:29 pm
- Model of CNC Machine: Joe's 4x4 Hybrid R&P Evolution
- Location: Chemainus, BC, Canada
Re: Porch Sign
Thanks for that. Great sign! You made me think of my mom. She passed 5 years ago but she had the 2 faces (Happy and Sad) in her living room as long as I can remember.
Cheers
Cheers