Happy New Year.
Here's a little oak stool I whipped up so I don't have to squat down to load the wood stove.
This oak was given to me after being stored outside for a while. I hand planed it, no sand paper.
I saw a drawing of oak leaves and acorns and modified it to created an aspire file for the carving.
I also used my cnc to scribe the curves at the top and bottom of the legs, then cut them out on the bandsaw.
Fireside stool
-
- Vectric Wizard
- Posts: 594
- Joined: Wed Mar 27, 2013 4:16 pm
- Model of CNC Machine: CNC Shark Pro Plus
- Contact:
Fireside stool
BillK
https://www.facebook.com/CarvingsByKurtz
https://www.facebook.com/CarvingsByKurtz
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: Fireside stool
Very Nice. Always nice when you can make use of materials that may otherwise be thrown out.
I also feel your pain for the squatting deal. After many knee operations mine will not handle the squatting. Knee pads on maybe 10 minutes max.
Thanks for sharing.
I also feel your pain for the squatting deal. After many knee operations mine will not handle the squatting. Knee pads on maybe 10 minutes max.
Thanks for sharing.
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli
- mfirlott
- Vectric Craftsman
- Posts: 299
- Joined: Thu Feb 07, 2013 12:49 am
- Model of CNC Machine: Stinger 1 (2014)
- Location: Cantley, Quebec, Canada
- Contact:
Re: Fireside stool
Nice. I think I'll make one now after spending some holiday time stoking the fireplace Hard on the knees and back.
(Mitch)
CAMaster Stinger I
Vectric Aspire
Epilog 45watt Helix Laser
CAMaster Stinger I
Vectric Aspire
Epilog 45watt Helix Laser
-
- Vectric Wizard
- Posts: 594
- Joined: Wed Mar 27, 2013 4:16 pm
- Model of CNC Machine: CNC Shark Pro Plus
- Contact:
Re: Fireside stool
Thanks for the Nice comments and thanks to Vectric for including this in this month's User Forum Showcase. Very Proud of that.
BillK
https://www.facebook.com/CarvingsByKurtz
https://www.facebook.com/CarvingsByKurtz
- SteveNelson46
- Vectric Wizard
- Posts: 2304
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: Fireside stool
That's a great looking stool. I really like the medullary rays on the seat and legs. Is it American white Oak?
Steve
-
- Vectric Wizard
- Posts: 594
- Joined: Wed Mar 27, 2013 4:16 pm
- Model of CNC Machine: CNC Shark Pro Plus
- Contact:
Re: Fireside stool
Yes it is. Milled from a tree that fell during hurricane Sandy in New York. Just a beautiful piece of wood.
BillK
https://www.facebook.com/CarvingsByKurtz
https://www.facebook.com/CarvingsByKurtz
- Creation in Wood
- Vectric Wizard
- Posts: 856
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA