Needed an outside clock for my wife when she is gardening and tends to loose track of time
its built from 1x9 eastern cedar 36x36 in 3/4 thick and strapped at the back cross wise with 1x4 cedar to prevent
the clock dial warping.
used African mahogany 1/4 thick for the numbers fastened with small brass screws.
Movement is recessed in the dial back about 4in dia
Used the cnc for the dial board and the co2 laser for the numbers
outdoor clock
-
- Posts: 33
- Joined: Fri Mar 18, 2016 5:54 pm
- Model of CNC Machine: Pilot Pro 4250
Re: outdoor clock
Very cool.
- BArnold
- Vectric Craftsman
- Posts: 189
- Joined: Sat May 02, 2015 12:20 am
- Model of CNC Machine: SO2/XCarve hybrid w/NEMA23 on all axes
- Location: Thomasville, GA, USA
Re: outdoor clock
Very good idea and execution!!
It's good to see the 7 and 8 got to their places in the final product.
It's good to see the 7 and 8 got to their places in the final product.