Just finished cutting,,,,no finish work yet ( sanding , staining, etc.)
Michael
Coat of Arms,
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: Coat of Arms,
Very nice Michael, The depth and detailing are fantastic unfortunate that the rays from the Quarter sawn are lost in the carving.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
- Makingtoothpicks
- Vectric Wizard
- Posts: 520
- Joined: Tue Jul 23, 2013 8:46 pm
- Model of CNC Machine: Cncrouterparts CPR2448
- Location: Burien, Wa
- Contact:
Re: Coat of Arms,
May I ask what size this is.
You have nice detail in the heads. What size bit did you use.
Thank You
Don
You have nice detail in the heads. What size bit did you use.
Thank You
Don
- mezalick
- Vectric Wizard
- Posts: 2970
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: Coat of Arms,
Don,
The size is 14" x 20" x 1.125"
The finish cut was with a 1/4" ball end with a 1/8" for some of the finer details
I got the models from Vector Art 3D...
I would like to say I did it all myself but I must give credit where credit is due....
I use their models as examples of the quality I want to produce...
Thanks
The size is 14" x 20" x 1.125"
The finish cut was with a 1/4" ball end with a 1/8" for some of the finer details
I got the models from Vector Art 3D...
I would like to say I did it all myself but I must give credit where credit is due....
I use their models as examples of the quality I want to produce...
Thanks
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com