Used Aspire to Design this simple Tool Box ID Name Tag. I am a Service Tech by trade and figured this would be a great conversation starter to generate some business. Cut On Poplar. Couldn't Upload Images so attached links.
https://www.dropbox.com/s/cbd2lsf54f4eo ... h.jpg?dl=0
https://www.dropbox.com/s/mmnowv23ix0lr ... 7.jpg?dl=0
https://www.dropbox.com/s/e00hbat0bdxnk ... 9.jpg?dl=0
https://www.dropbox.com/s/r3kbmveifemvy ... 0.jpg?dl=0
https://www.dropbox.com/s/l4xglgrhw6ktm ... 7.jpg?dl=0
Tool Box Name Tag
-
- Vectric Wizard
- Posts: 528
- Joined: Thu May 14, 2015 12:23 am
- Model of CNC Machine: FLA Saturn 4x4 / 7W & 60W lasers
- Location: Bemidji, MN
- Contact:
Re: Tool Box Name Tag
Nice work. What is your finish technique?
Dave
https://lakesedgewoodcraft.com/
https://lakesedgewoodcraft.com/
Re: Tool Box Name Tag
Thanks,
Light Sanding, Seal with Shellac, Hand Painted with acrylic paints. and then Sealed with a Satin Clear Coat (one of those spray cans you get at Lowes).
Light Sanding, Seal with Shellac, Hand Painted with acrylic paints. and then Sealed with a Satin Clear Coat (one of those spray cans you get at Lowes).
-
- Vectric Wizard
- Posts: 528
- Joined: Thu May 14, 2015 12:23 am
- Model of CNC Machine: FLA Saturn 4x4 / 7W & 60W lasers
- Location: Bemidji, MN
- Contact:
Re: Tool Box Name Tag
Sounds like my exact method. You must be a better painter than me. I really like your painting technique for this sign.
Dave
https://lakesedgewoodcraft.com/
https://lakesedgewoodcraft.com/
-
- Vectric Craftsman
- Posts: 245
- Joined: Fri Jan 18, 2013 8:47 am
- Model of CNC Machine: Shark Pro HD and CNCrouterparts 4896
- Location: Willow, Alaska
- Contact:
Re: Tool Box Name Tag
very well done and yes the painting is most excellent