horse build "penetangore" completed today

This is the place to post images of work produced using Aspire

horse build "penetangore" completed today

Postby stankern » Thu Mar 24, 2016 10:27 pm

the horse is done most people have seen the 0-3 parts ,its just the last part that is new
it was a long project but I am happy with it
So from a cardboard lasered model to a 1/4 plywood full size model then to a full size 10.5 hand horse
in wood laminated here she is
Having the 4x8 cnc came in quite handy for the cuts, never used the full bed before

https://youtu.be/gouGlNAwAtU horse part0

https://youtu.be/Wp8zcwZRHKI horse part1

https://youtu.be/Uqnz1n_naqY horse part2

https://youtu.be/bt23QqPRMqk part 3 shaping the horse

https://youtu.be/tY2nHkD03ek part 4 horse completed
Attachments
final 5.jpg
final6.jpg
final 1.jpg
final 3.jpg
final4.jpg
stankern
Vectric Wizard
 
Posts: 416
Joined: Tue Nov 27, 2007 3:21 pm
Location: ontario canada

Re: horse build "penetangore" completed today

Postby Rick O. » Fri Mar 25, 2016 1:03 am

Very nice!

In a previous post you mentioned putting it outside. May I ask what finish you are using to protect it from the weather?

Rick
RickO
Rick O.
Vectric Craftsman
 
Posts: 242
Joined: Mon Jul 18, 2011 7:54 pm
Location: Houston, Texas
Model of CNC Machine: CNC router

Re: horse build "penetangore" completed today

Postby garylmast » Fri Mar 25, 2016 1:08 pm

Great job.
garylmast
Vectric Wizard
 
Posts: 570
Joined: Fri Oct 23, 2009 4:03 pm
Location: Sandy, Utah

Re: horse build "penetangore" completed today

Postby stankern » Fri Mar 25, 2016 3:04 pm

yes its going outside for the summer ,I used 2 coats of an oil type primer and 2 coats of a paint that is also an oil type.
When I say oil I mean the oil substitute that they use today.
I did not want to use a water based paint ,and I could not stain as the horse has been patched with bondo and it would have looked bad
The 1/4 plywood model was stained and it looked good because there were no patches ,I would have preferred to stain
Attachments
final6.jpg
stankern
Vectric Wizard
 
Posts: 416
Joined: Tue Nov 27, 2007 3:21 pm
Location: ontario canada

Re: horse build "penetangore" completed today

Postby Creation in Wood » Sat Mar 26, 2016 3:13 pm

Very creative. Great job :lol: :lol:
Thank You
Doug
User avatar
Creation in Wood
Vectric Craftsman
 
Posts: 252
Joined: Thu May 28, 2015 8:58 pm
Location: Monument, Colorado USA
Model of CNC Machine: Legacy Maverick CNC 4x8

Re: horse build "penetangore" completed today

Postby mtylerfl » Sat Mar 26, 2016 9:29 pm

Stan, you did a fine job. It looks great! Many hours in that!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
User avatar
mtylerfl
Vectric Wizard
 
Posts: 2446
Joined: Thu Jan 29, 2009 3:54 am
Location: Brunswick, GA
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha

Re: horse build "penetangore" completed today

Postby stankern » Tue Apr 19, 2016 5:37 am

the horse is done and tied to the front gate at my shop
Attachments
net1.jpg
net5.jpg
net4.jpg
net2.jpg
stankern
Vectric Wizard
 
Posts: 416
Joined: Tue Nov 27, 2007 3:21 pm
Location: ontario canada

Re: horse build "penetangore" completed today

Postby garylmast » Tue Apr 19, 2016 1:40 pm

Cool, now it needs a colt to keep it company (and give you a new summer job).
garylmast
Vectric Wizard
 
Posts: 570
Joined: Fri Oct 23, 2009 4:03 pm
Location: Sandy, Utah

Re: horse build "penetangore" completed today

Postby Creation in Wood » Tue Apr 19, 2016 2:02 pm

That is a clever idea and you don't have to feed the horse. I like it. :idea: :idea:
Thank You
Doug
User avatar
Creation in Wood
Vectric Craftsman
 
Posts: 252
Joined: Thu May 28, 2015 8:58 pm
Location: Monument, Colorado USA
Model of CNC Machine: Legacy Maverick CNC 4x8

Re: horse build "penetangore" completed today

Postby mtylerfl » Tue Apr 19, 2016 2:06 pm

Man, it looks great outside by the gate! A very nice accent for the property!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
User avatar
mtylerfl
Vectric Wizard
 
Posts: 2446
Joined: Thu Jan 29, 2009 3:54 am
Location: Brunswick, GA
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha

Re: horse build "penetangore" completed today

Postby stankern » Wed Apr 20, 2016 1:56 am

its funny to suggest an animal companion as I would like a dog but not full time
maybe a dog would be cool beside the horse.
I have noticed the robins like her as they sit on that tree near her head and 2 morning doves are looking at her
well I don't have to see a man about a horse I have one
stankern
Vectric Wizard
 
Posts: 416
Joined: Tue Nov 27, 2007 3:21 pm
Location: ontario canada


Return to Aspire - Gallery

Who is online

Users browsing this forum: dealguy11 and 15 guests