Brewery Sign
-
- Posts: 34
- Joined: Mon Nov 10, 2008 3:58 am
- Model of CNC Machine: Home Built
- Location: Washougal, WA
Brewery Sign
Made this sign for a buddy!
Someday I'll get someone to buck up for sign foam.. This one is made from a ceder glue up.
I have a whole bunch more photos but whenever I add one my browser goes blank or it says my .jpg is invalid..
33 inches tall, about 2.5 inched thick, (5.5 inches counting the hops.).
Someday I'll get someone to buck up for sign foam.. This one is made from a ceder glue up.
I have a whole bunch more photos but whenever I add one my browser goes blank or it says my .jpg is invalid..
33 inches tall, about 2.5 inched thick, (5.5 inches counting the hops.).
- dhellew2
- Vectric Wizard
- Posts: 1326
- Joined: Thu May 22, 2008 10:14 pm
- Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
- Location: Royal City Washington
Re: Brewery Sign
Really great job. The paint looks perfect. Dale
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale
Young = time, no money
Old = money, no time
Dale
- ChrisInEstes
- Vectric Wizard
- Posts: 841
- Joined: Fri Jul 17, 2009 8:00 pm
- Model of CNC Machine: Vytek 4' X 8' - Perske Spindle - Mach3
- Location: Estes Park, Colorado, USA
Re: Brewery Sign
Very nice.
I like seeing beer related creations... Keep up the good work!
Chris
I like seeing beer related creations... Keep up the good work!
Chris
Aspire 9.5 - FlexiEXPERT 11 - Vytek Rebel 4' x 8' - 5HP Perske Spindle
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: Brewery Sign
I agree...looks great!
Michael
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
- Makingtoothpicks
- Vectric Wizard
- Posts: 520
- Joined: Tue Jul 23, 2013 8:46 pm
- Model of CNC Machine: Cncrouterparts CPR2448
- Location: Burien, Wa
- Contact:
Re: Brewery Sign
Another great looking work
Don
Don
- customquint
- Vectric Craftsman
- Posts: 240
- Joined: Tue Jan 25, 2011 4:18 am
- Model of CNC Machine: AXYZ
- Location: Piqua, OH
- Contact:
Re: Brewery Sign
Very nice, great job
- T.R.MacMunn
- Vectric Wizard
- Posts: 318
- Joined: Sun Jan 01, 2012 2:30 pm
- Model of CNC Machine: CAMaster MC4836
- Location: Mountain Grove, Ontario, Canada
- Contact:
Re: Brewery Sign
Very nice work ......
- ChrisInEstes
- Vectric Wizard
- Posts: 841
- Joined: Fri Jul 17, 2009 8:00 pm
- Model of CNC Machine: Vytek 4' X 8' - Perske Spindle - Mach3
- Location: Estes Park, Colorado, USA
Re: Brewery Sign
David, where did you get the hop flower model? I've been looking for something like it.
Thanks!
Chris
Thanks!
Chris
Aspire 9.5 - FlexiEXPERT 11 - Vytek Rebel 4' x 8' - 5HP Perske Spindle
-
- Posts: 34
- Joined: Mon Nov 10, 2008 3:58 am
- Model of CNC Machine: Home Built
- Location: Washougal, WA
Re: Brewery Sign
Hi Chris,ChrisInEstes wrote:David, where did you get the hop flower model? I've been looking for something like it.
Thanks!
Chris
I googled 'stl hop model' and wound up with https://hop.cgtrader.com/ but there were a few available.. Took a bit of fooling to get the multiple hops in the model to give me the two overlapped ones I wound up with.
Mil
- ChrisInEstes
- Vectric Wizard
- Posts: 841
- Joined: Fri Jul 17, 2009 8:00 pm
- Model of CNC Machine: Vytek 4' X 8' - Perske Spindle - Mach3
- Location: Estes Park, Colorado, USA
Re: Brewery Sign
davidmillerlowe wrote:Hi Chris,ChrisInEstes wrote:David, where did you get the hop flower model? I've been looking for something like it.
Thanks!
Chris
I googled 'stl hop model' and wound up with https://hop.cgtrader.com/ but there were a few available.. Took a bit of fooling to get the multiple hops in the model to give me the two overlapped ones I wound up with.
Mil
Thanks for the info... I'm w/o Aspire, so I can't deal with a full 3D model.
Chris
Aspire 9.5 - FlexiEXPERT 11 - Vytek Rebel 4' x 8' - 5HP Perske Spindle
-
- Vectric Craftsman
- Posts: 260
- Joined: Tue Mar 11, 2014 6:12 pm
- Model of CNC Machine: salecnc XJ1224
- Location: Auckland New Zealand
Re: Brewery Sign
WOW....Love it as Chris said, I do love beer related signs. Did you design it or was it from a customers brief?. Also how did you finish it, it looks great, real "man cave" stuff.
regards
Brian
regards
Brian
-
- Posts: 34
- Joined: Mon Nov 10, 2008 3:58 am
- Model of CNC Machine: Home Built
- Location: Washougal, WA
Re: Brewery Sign
Here is the Picasa album with all the photos...
https://picasaweb.google.com/1180226087 ... directlink
The artwork I received was a tiny logo from the from the brewery webpage (top left).. So I got to add some detail.
http://www.cointossbrewing.com/
Pretty much all the paints are Acrylic craft paints except for the penny which is a Krylon hammered copper spray with some sponged on brown and old bronze acrylic paints in an attempt to add a patina.. Looks better in person than the photos..
I was experimenting, since it's an inside sign I used brush-on lacquer for the finish. I've probably violated several 'this-paint-on-that-paint' rules
Mil
https://picasaweb.google.com/1180226087 ... directlink
The artwork I received was a tiny logo from the from the brewery webpage (top left).. So I got to add some detail.
http://www.cointossbrewing.com/
Pretty much all the paints are Acrylic craft paints except for the penny which is a Krylon hammered copper spray with some sponged on brown and old bronze acrylic paints in an attempt to add a patina.. Looks better in person than the photos..
I was experimenting, since it's an inside sign I used brush-on lacquer for the finish. I've probably violated several 'this-paint-on-that-paint' rules
Mil
-
- Vectric Craftsman
- Posts: 233
- Joined: Wed Jul 10, 2013 3:43 am
- Model of CNC Machine: Home made
- Location: Canada
Re: Brewery Sign
Great job, I love that you added the hops models on top of the sign for a great relief. They really jump out. Nice.