hdu table insert

This is the place to post images of work produced using Aspire

hdu table insert

Postby gillzilla » Mon Jul 27, 2015 9:23 pm

here's some pictures of an hdu relief carved and airbrushed table insert i am working on.
Attachments
IMG_2130 (Small).JPG
pre paint
IMG_2135 (Small).JPG
gillzilla
Vectric Apprentice
 
Posts: 52
Joined: Thu Mar 18, 2010 4:05 am
Location: Belgrade montana
Model of CNC Machine: axyz 7012

Re: hdu table insert

Postby dhellew2 » Mon Jul 27, 2015 11:35 pm

Beautiful work!
Dale
You will get old if you live long enough!

Dale
User avatar
dhellew2
Vectric Wizard
 
Posts: 1131
Joined: Thu May 22, 2008 10:14 pm
Location: Royal City Washington
Model of CNC Machine: Legacy Artisan 72

Re: hdu table insert

Postby gillzilla » Mon Jul 27, 2015 11:46 pm

thanks Dale,
planning to wrap the edges with wood and have a nice piece of bevel glass for the top. legs i'm still thinking about.
gillzilla
Vectric Apprentice
 
Posts: 52
Joined: Thu Mar 18, 2010 4:05 am
Location: Belgrade montana
Model of CNC Machine: axyz 7012

Re: hdu table insert

Postby sailfl » Tue Jul 28, 2015 12:11 am

Very nice work. Thank you for sharing
sailfl
Vectric Wizard
 
Posts: 377
Joined: Sat Dec 15, 2007 3:46 pm
Location: Orlando, FL
Model of CNC Machine: MechMate

Re: hdu table insert

Postby MTSO » Tue Jul 28, 2015 1:56 am

How big is it, how long did it take to machine. How Cool is it!

regards

Brian
MTSO
Vectric Craftsman
 
Posts: 214
Joined: Tue Mar 11, 2014 6:12 pm
Location: Auckland New Zealand
Model of CNC Machine: salecnc XJ1224

Re: hdu table insert

Postby dgoddard » Tue Jul 28, 2015 2:03 am

Great work. About year ago I started airbrushing some of my 3D work. My airbrushing is not up to outstanding work. Looking forward to other projects.
dgoddard
Vectric Apprentice
 
Posts: 80
Joined: Thu Oct 27, 2011 10:06 pm
Location: Maysville, GA
Model of CNC Machine: Joe's CastCNC Hybrid 4x4 R&P router

Re: hdu table insert

Postby gillzilla » Tue Jul 28, 2015 3:57 pm

it's 44 inches wide by 21 inches tall and 2 inches thick.
run time was 18 hours using a 1/4" ball nose for roughing and an 1/8" ballnose for finishing.
gillzilla
Vectric Apprentice
 
Posts: 52
Joined: Thu Mar 18, 2010 4:05 am
Location: Belgrade montana
Model of CNC Machine: axyz 7012

Re: hdu table insert

Postby gillzilla » Tue Jul 28, 2015 4:06 pm

here's some shots of a skull model i just completed also ( just modeled, haven't cut yet).
Attachments
skull (Small).jpg
skull2 (Small).jpg
skull3 (Small).jpg
gillzilla
Vectric Apprentice
 
Posts: 52
Joined: Thu Mar 18, 2010 4:05 am
Location: Belgrade montana
Model of CNC Machine: axyz 7012

Re: hdu table insert

Postby gillzilla » Tue Jul 28, 2015 7:15 pm

here's some shots of a sea turtle model i just completed also ( just modeled, haven't cut yet).

i love working with vectric to bring my ideas to life, the work pays off when you cut your projects.
Attachments
sea turtle 1 (Small).jpg
sea turtle 2 (Small).jpg
sea turtle 3 (Small).jpg
gillzilla
Vectric Apprentice
 
Posts: 52
Joined: Thu Mar 18, 2010 4:05 am
Location: Belgrade montana
Model of CNC Machine: axyz 7012

Re: hdu table insert

Postby seabreezr » Sun Aug 09, 2015 11:57 pm

Gazilla that is absolutely beautiful. Will make a great table.. I try painting like that and now im looking at youtubes for practice still bad but not as much lol.

Any pointers? keep up the great work.
seabreezr
Vectric Apprentice
 
Posts: 92
Joined: Sun Jun 15, 2014 3:13 pm
Model of CNC Machine: CNC Shark

Re: hdu table insert

Postby gillzilla » Mon Aug 10, 2015 3:28 pm

the best pointer i can think of for the painting is go gently. meaning thin soft layers, most signs are thick coats and flat painting. for something like this it takes layers to get it looking right.
best of luck and keep practicing, you'll only get better.
gillzilla
Vectric Apprentice
 
Posts: 52
Joined: Thu Mar 18, 2010 4:05 am
Location: Belgrade montana
Model of CNC Machine: axyz 7012

finally done

Postby gillzilla » Wed Feb 10, 2016 8:36 pm

well thanks to the help of a friend (he built the woodwork) this has finally become a finished project.
Attachments
tabl1.jpg
table2.jpg
table3.jpg
gillzilla
Vectric Apprentice
 
Posts: 52
Joined: Thu Mar 18, 2010 4:05 am
Location: Belgrade montana
Model of CNC Machine: axyz 7012

Re: hdu table insert

Postby Leo » Thu Feb 11, 2016 12:00 am

That's fantastic Gill.
Imagine the Possibilities of a Creative mind

www.leosworkshop.com
User avatar
Leo
Vectric Wizard
 
Posts: 2416
Joined: Sat Jul 14, 2007 3:02 am
Location: East Freetown, Ma.
Model of CNC Machine: 1300 x 1300 x 254


Return to Aspire - Gallery

Who is online

Users browsing this forum: No registered users and 11 guests