Logo
-
BSImages
- Vectric Wizard
- Posts: 340
- Joined: Fri Jan 20, 2006 7:36 am
- Model of CNC Machine: Home designed and built.
- Location: Pine Grove, California
- Contact:
Logo
I cut this last week. The flat depth is 0.5" with a 0.25" end mill. The wolf's head was cut with a 0.125 tapered ball nose bit. And the V-carving was cut with a 0.25" 60 degree V-bit.
- Attachments
-
- The original logo
-
- Cut out of Ponderosa Pine 24" x 14" with Red Oak stain.