Finnished some sponsorsigns for a golf course today, Material Cedar, "sandblasted texture" with Aspire,
please tell me what you think.
Christer
http://www.kyltti.fi
https://www.etsy.com/shop/SignBrother?ref=hdr_shop_menu
Sponsor signs
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: Sponsor signs
To me, they are all very stylish signs with an effective message. Nicely done.
CarveOne
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
- gordread
- Vectric Wizard
- Posts: 382
- Joined: Sun Jul 08, 2012 3:29 am
- Model of CNC Machine: CNC Professor HDX
- Location: Onoway, Alberta
- Contact:
Re: Sponsor signs
Very nice. What type of paint did you use on the cedar?
-
- Vectric Wizard
- Posts: 1129
- Joined: Thu Jul 18, 2013 4:58 pm
- Model of CNC Machine: homebuild / VCP 8.0
Re: Sponsor signs
First class!
Texture adds a nice touch
Is that clear white cedar?
Texture adds a nice touch
Is that clear white cedar?
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Sponsor signs
Good clean work on ALL, but love the "Fazer"
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Craftsman
- Posts: 245
- Joined: Fri Jan 18, 2013 8:47 am
- Model of CNC Machine: Shark Pro HD and CNCrouterparts 4896
- Location: Willow, Alaska
- Contact:
Re: Sponsor signs
Very stylish and very clean. Can you provide some detail on the purple one as to how you painted it???? It looks like you painted it purple than ran it through a planer to clean off the top letters, but that does not explain the clean lines on the recessed letters. Very nice. I struggle with this part of the projects. Thanks.. Scottart.
Re: Sponsor signs
Thank you all.
I´m not sure what kind of cedar this is as cedar is not a native species to Finland, it is sold to me as western red cedar and imported from Canada, my customer claims that it is redwood. It is very light and doesnt smell very good. Maybe someone out there can identify it from the attached picture? (i sprinkled a little water on it to bring out the grain) However, it is very funny to work with,especially as the boards that i got are of a very good quality.
I used artists acrylic paint for the colors.
For the painted letters I started with routing out the contour with 2mm offset(v-bit 0,2mm cutting depth), I painted the letters and masked them with MACmask 84.817 http://www.mactac.eu/products-macmask-8 ... 11--26.htm , then I routed the rest and painted the background, I finnished with three coats of wood oil with UV-protection.
I made an exeption for the "Fazer"-sign where the gold paint failed, I had to put on the gold after routing using "Goldfinger" metallic paste http://www.daler-rowney.com/content/goldfinger which was excellent for this purpose as you just smear it on with your finger, let it dry and scrape the edges with a sharp knife. It got at least as clean as the masked ones.
I hope this answered your questions.
Christer
http://www.kyltti.fi
https://www.etsy.com/shop/SignBrother?r ... _shop_menu
I´m not sure what kind of cedar this is as cedar is not a native species to Finland, it is sold to me as western red cedar and imported from Canada, my customer claims that it is redwood. It is very light and doesnt smell very good. Maybe someone out there can identify it from the attached picture? (i sprinkled a little water on it to bring out the grain) However, it is very funny to work with,especially as the boards that i got are of a very good quality.
I used artists acrylic paint for the colors.
For the painted letters I started with routing out the contour with 2mm offset(v-bit 0,2mm cutting depth), I painted the letters and masked them with MACmask 84.817 http://www.mactac.eu/products-macmask-8 ... 11--26.htm , then I routed the rest and painted the background, I finnished with three coats of wood oil with UV-protection.
I made an exeption for the "Fazer"-sign where the gold paint failed, I had to put on the gold after routing using "Goldfinger" metallic paste http://www.daler-rowney.com/content/goldfinger which was excellent for this purpose as you just smear it on with your finger, let it dry and scrape the edges with a sharp knife. It got at least as clean as the masked ones.
I hope this answered your questions.
Christer
http://www.kyltti.fi
https://www.etsy.com/shop/SignBrother?r ... _shop_menu