More YoYo projects - Just couldn't resist
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: More YoYo projects - Just couldn't resist
Nah!,
Quite obviously it's a Gimp like me, on his Mag-Lev wheelchair, calling the Mothership on his early version Motorola "Bag phone" complaining that the last download didn't "Take"
Not sure how a smart guy like you misinterpreted something so Simple
We simple little VCP guys can now project onto 3D shapes with VCP8
Now that Michael explained "Tilt/fade" and watching tutorials,
I MAY soon be CRAWLING out of the Primordial Ooze and actually MAKE something
Not Positive.....but didn't Mayans kill all their Yo-Yo makers because they thought they were Wizards?
Explains why we've never dug any up.
Quite obviously it's a Gimp like me, on his Mag-Lev wheelchair, calling the Mothership on his early version Motorola "Bag phone" complaining that the last download didn't "Take"
Not sure how a smart guy like you misinterpreted something so Simple
We simple little VCP guys can now project onto 3D shapes with VCP8
Now that Michael explained "Tilt/fade" and watching tutorials,
I MAY soon be CRAWLING out of the Primordial Ooze and actually MAKE something
Not Positive.....but didn't Mayans kill all their Yo-Yo makers because they thought they were Wizards?
Explains why we've never dug any up.
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- mikeacg
- Vectric Wizard
- Posts: 659
- Joined: Sun Nov 02, 2008 10:53 pm
- Model of CNC Machine: Camaster Stinger, Sidewinder, SB 4x4
- Location: Newberry, MI
- Contact:
Re: More YoYo projects - Just couldn't resist
You guys are killing me this morning! Needed a good laugh to get my Sunday started!
Love what you are doing with the yoyos as well. Might have to make up a bunch of them for the Senior Center where Mama goes...
Mike
Love what you are doing with the yoyos as well. Might have to make up a bunch of them for the Senior Center where Mama goes...
Mike
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: More YoYo projects - Just couldn't resist
NOT crawling out of the OOZE today!!!
Looks more like a Mayan Sacrificial Well for killing Spindle and bits!
Back to the drawing slate
Don't help....I'll figure it out, but going back to standard resolution.
Going to make some "Regular" chips today before I sacrifice my Laptop
Pic is only for laughs.
Certainly doesn't look like my .125" deep dish at 0 height, with Mayan Vcarved onto it.
Oh Well.
Enough playing.
scott
Looks more like a Mayan Sacrificial Well for killing Spindle and bits!
Back to the drawing slate
Don't help....I'll figure it out, but going back to standard resolution.
Going to make some "Regular" chips today before I sacrifice my Laptop
Pic is only for laughs.
Certainly doesn't look like my .125" deep dish at 0 height, with Mayan Vcarved onto it.
Oh Well.
Enough playing.
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Wizard
- Posts: 1129
- Joined: Thu Jul 18, 2013 4:58 pm
- Model of CNC Machine: homebuild / VCP 8.0
Re: More YoYo projects - Just couldn't resist
Had the Mayan utilized the wheel, perhaps they would have figured out this Yo-Yo thing!...... And Scott, if you ever do upgrade to Aspire, Vectric will need an extra server just for your post........ just saying..... .... (But it will be interesting and educational reading, I'm certain!)scottp55 wrote:Nah!,
Quite obviously it's a Gimp like me, on his Mag-Lev wheelchair, calling the Mothership on his early version Motorola "Bag phone" complaining that the last download didn't "Take"
Not sure how a smart guy like you misinterpreted something so Simple
We simple little VCP guys can now project onto 3D shapes with VCP8
Now that Michael explained "Tilt/fade" and watching tutorials,
I MAY soon be CRAWLING out of the Primordial Ooze and actually MAKE something
Not Positive.....but didn't Mayans kill all their Yo-Yo makers because they thought they were Wizards?
Explains why we've never dug any up.
P.S. you made my day too!
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: More YoYo projects - Just couldn't resist
Glenn,
There's a method to my verbosity
Trying to Get CarveOne so TICKED at me for stomping on his thread, that he'll drive up here to KILL me.......
When I'll Promptly run him over with my wheelchair.....And hold him there until he promises to teach me some of his tricks!
THEN I'll release him.....THEN he kills me
scott
There's a method to my verbosity
Trying to Get CarveOne so TICKED at me for stomping on his thread, that he'll drive up here to KILL me.......
When I'll Promptly run him over with my wheelchair.....And hold him there until he promises to teach me some of his tricks!
THEN I'll release him.....THEN he kills me
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: More YoYo projects - Just couldn't resist
ME misinterpret something? Of course, if it gets smiles ...
The Mayan leaders were known for sacrifices of their enemies and whoever else they didn't like. There are deep pools with the remains at the bottom.
CarveOne
The Mayan leaders were known for sacrifices of their enemies and whoever else they didn't like. There are deep pools with the remains at the bottom.
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: More YoYo projects - Just couldn't resist
Ok, I won't tell you how deceptively simple it is to raise and lower a model using the wrench tool. Once you VCP8 guys and gals learn to use that tool to control model thickness and position within the material you will start sticking 3D models all over your projects. Just because you can.scottp55 wrote:NOT crawling out of the OOZE today!!!
Looks more like a Mayan Sacrificial Well for killing Spindle and bits!
Back to the drawing slate
Don't help....I'll figure it out, but going back to standard resolution.
Going to make some "Regular" chips today before I sacrifice my Laptop
Pic is only for laughs.
Certainly doesn't look like my .125" deep dish at 0 height, with Mayan Vcarved onto it.
Oh Well.
Enough playing.
scott
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: More YoYo projects - Just couldn't resist
Nah, I would never do that. Just ask and I'll give you an answer, even if I'm wrong. Not having VCP8 leaves me guessing as to which tools it has that I'm familiar with.scottp55 wrote:Glenn,
There's a method to my verbosity
Trying to Get CarveOne so TICKED at me for stomping on his thread, that he'll drive up here to KILL me.......
When I'll Promptly run him over with my wheelchair.....And hold him there until he promises to teach me some of his tricks!
THEN I'll release him.....THEN he kills me
scott
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: More YoYo projects - Just couldn't resist
Thanks Mike.mikeacg wrote:You guys are killing me this morning! Needed a good laugh to get my Sunday started!
Love what you are doing with the yoyos as well. Might have to make up a bunch of them for the Senior Center where Mama goes...
Mike
I'll post the Yo-Yo machining fixture file soon. Use the Vectricon Yo-Yo download if you want to use Michael Tyler's project. I'll post one of my own here also. The basic Yo-Yo shape is somewhat different, mine having flatter edges and is less rounded. My file will include the details for making two halves on a 3/4" x 4" x 8" block of material that fits the machining fixture. I need to make one more Yo-Yo since making some changes in the past day or so.
Below is one more that uses a circle of hearts that I made a year or so ago while playing with the extrude and weave tool.
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: More YoYo projects - Just couldn't resist
Two more Yo-Yo designs created today. (I told you guys not to get me started.) I have a decent library built up now, so I'll slow down until I can finish another project tomorrow.
Vcarve combined with 3D models look pretty good to me.
CarveOne
Vcarve combined with 3D models look pretty good to me.
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: More YoYo projects - Just couldn't resist
Partial to that last Combo myself:)
But like the weaves like always(especially the "Hearts").
VCarve looks Really nice on a Dome, and the "dots" make a really nice contrast.
But like the weaves like always(especially the "Hearts").
VCarve looks Really nice on a Dome, and the "dots" make a really nice contrast.
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: More YoYo projects - Just couldn't resist
The first two Yo-Yos I made used 1/4" dowels for the axles. I have since changed the drawings to 5/16" dowels. I never had this problem with the store bought ones I had as a kid, but there is a tendency for the string to put pressure on the insides of the YoYo and it will cause the sides to come apart. The axle holes need to be pretty tight on the axle. Glue is my final resort for those, but then the string can't be changed again. I used red oak dowels because I already had them. I'll buy maple or poplar next time to see if they work better. Maybe the red oak is too slick. I'll also increase the hole depth some more to get additional friction.
One other point about the 3D models on the Yo-Yos is that it gives better grip when playing with them than plain smooth sides like the old ones. The Vcarved ones also, to a lesser degree depending on the design. Fine, shallow line Vcarvings still give some enhanced grip.
CarveOne
One other point about the 3D models on the Yo-Yos is that it gives better grip when playing with them than plain smooth sides like the old ones. The Vcarved ones also, to a lesser degree depending on the design. Fine, shallow line Vcarvings still give some enhanced grip.
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: More YoYo projects - Just couldn't resist
The snowflake design came from the all-free-downloads site. Searched for snowflakes. Free for non-commercial use. The eps file download wouldn't open, so I did a vector conversion of the image and did a lot of node editing. It needs considerably more cleanup editing to convert lines to curves and get rid of extra nodes. It may have been quicker to manually draw one segment and use the array tool.scottp55 wrote:Partial to that last Combo myself:)
But like the weaves like always(especially the "Hearts").
VCarve looks Really nice on a Dome, and the "dots" make a really nice contrast.
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
-
- Vectric Wizard
- Posts: 1129
- Joined: Thu Jul 18, 2013 4:58 pm
- Model of CNC Machine: homebuild / VCP 8.0
Re: More YoYo projects - Just couldn't resist
CarveOne,
I'm disappointed you don't remember how to replace an authentic yo-yo string
Replacement strings (no breaking yo-yo or PHD required)
http://www.amazon.com/Yomega-900PK-W-Yo ... B0016HJVGU
I'm disappointed you don't remember how to replace an authentic yo-yo string
Replacement strings (no breaking yo-yo or PHD required)
http://www.amazon.com/Yomega-900PK-W-Yo ... B0016HJVGU
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: More YoYo projects - Just couldn't resist
My old ones (55-60 years ago) just had a cotton string with one end stuck in the axle hole. The dowel was a very tight fit into the holes. For the sleepers, the string had a simple loop tied at end and the axle went through the loop. The newfangled strings are what Michael T. gave me at the Aspire camp. I'll bet he did that just to throw an old man into a loop figuring it out.
Thanks for the video link. I'll glue all of the current and future axles.
CarveOne
Thanks for the video link. I'll glue all of the current and future axles.
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com