Mantel vertical posts

This is the place to post images of work produced using Aspire

Mantel vertical posts

Postby scottart » Sat Feb 14, 2015 2:34 am

These are some Spruce vertical panels for a Mantel I am building.. Just out of the Shark. 11.5" x 46" x 1.7 deep.
Attachments
10968595_775991159153437_6805502683141531843_n.jpg
Last minutes in the Shark
10386240_775991339153419_645767801711097367_n.jpg
Two Vertical panels
10615545_775991232486763_2015425420711238657_n.jpg
some Details
scottart
Vectric Craftsman
 
Posts: 245
Joined: Fri Jan 18, 2013 8:47 am
Location: Willow, Alaska
Model of CNC Machine: Shark Pro HD and CNCrouterparts 4896

Re: Mantel vertical posts

Postby glenninvb » Sat Feb 14, 2015 2:37 am

Very nice!
Did you model the 3d scene yourself?
glenninvb
Vectric Wizard
 
Posts: 1129
Joined: Thu Jul 18, 2013 4:58 pm
Model of CNC Machine: homebuild / VCP 8.0

Re: Mantel vertical posts

Postby scottart » Sat Feb 14, 2015 3:29 am

The rod and reels, Bear tracks and Trout our mine, made in Aspire. the rocks are the "stones" file from Textures in that come with Aspire in the clip art file. I modified the rocks to get some fatter than the flat file.
scottart
Vectric Craftsman
 
Posts: 245
Joined: Fri Jan 18, 2013 8:47 am
Location: Willow, Alaska
Model of CNC Machine: Shark Pro HD and CNCrouterparts 4896

Re: Mantel vertical posts

Postby scottart » Sat Feb 14, 2015 8:50 am

Here is a quick look at where the entire piece is going. these are just stacked because I have not seen all three components together yet. now a whole bunch of finish carving and sanding and all that other stuff. But you can start to see the theme and general composition.
Attachments
10978617_927655237297569_7488298236211658132_n.jpg
scottart
Vectric Craftsman
 
Posts: 245
Joined: Fri Jan 18, 2013 8:47 am
Location: Willow, Alaska
Model of CNC Machine: Shark Pro HD and CNCrouterparts 4896

Re: Mantel vertical posts

Postby scottp55 » Sat Feb 14, 2015 12:21 pm

ANOTHER Nice piece!!
(I was wondering where the Salmon were :) )
"One accurate measurement is worth a thousand expert opinions"

GMH


scott
User avatar
scottp55
Vectric Wizard
 
Posts: 3296
Joined: Thu May 09, 2013 11:30 am
Location: Kennebunkport, Maine, US
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10

Re: Mantel vertical posts

Postby Leo » Sat Feb 14, 2015 2:51 pm

WOW that is simply amazing
Imagine the Possibilities of a Creative mind

www.leosworkshop.com
User avatar
Leo
Vectric Wizard
 
Posts: 2992
Joined: Sat Jul 14, 2007 3:02 am
Location: East Freetown, Ma.
Model of CNC Machine: 1300 x 1300 x 254

Re: Mantel vertical posts

Postby Mike-S » Sat Feb 14, 2015 6:23 pm

It keeps getting more impressive. :D
User avatar
Mike-S
Vectric Wizard
 
Posts: 1103
Joined: Mon Jun 13, 2011 6:45 am
Location: Hayesville, NC
Model of CNC Machine: Joe's Hybrid 4x4 (but 3x3)

Re: Mantel vertical posts

Postby scottart » Wed Feb 18, 2015 5:47 am

i finished the mantel, this is it bolted together for an upcoming show, than off to installation in March. Fun project, all told about 44 hours in the Shark HD, dozens of tool changes, tile changes and a few errors that make me flinch.. but you can only see them when you zoom in .. so don't
Attachments
1970501_778464595572760_2997777781867030584_n.jpg
10001445_778464628906090_6370894197205089124_n.jpg
scottart
Vectric Craftsman
 
Posts: 245
Joined: Fri Jan 18, 2013 8:47 am
Location: Willow, Alaska
Model of CNC Machine: Shark Pro HD and CNCrouterparts 4896

Re: Mantel vertical posts

Postby J Paszkiewicz » Thu Mar 05, 2015 6:19 pm

I see from your back ground decor that you are an avid out doors man. That's great and your love for the out doors shows through in your work! I also love that you picked pine as your wood type. Your project is wonderful and I hope you will post a picture once you have this installed with all the finale decorations in place. I love your choice of art you chose, where they from clip art? You did a wonderful job something to be very proud of for many years to come.
J Paszkiewicz
Vectric Apprentice
 
Posts: 22
Joined: Tue Jan 15, 2013 12:58 am
Model of CNC Machine: shopbot 48x96

Re: Mantel vertical posts

Postby scottart » Thu Mar 05, 2015 11:13 pm

Thanks for the kind words. Yes, i am an outdoorsman and an artist, the CNC stuff came after we opened up a Cabin styles / Mancave Store in Alaska.

all the art on the mantel and verticals, excepting only the rock tiles in the verticals is original creation i made in Aspire. I have been painting and power carving for many years. Finding affordable CNC equipment has just added greatly to what I can make and sell.
Attachments
Feeding Bass web.JPG
attached is one my Non CNC art works.
scottart
Vectric Craftsman
 
Posts: 245
Joined: Fri Jan 18, 2013 8:47 am
Location: Willow, Alaska
Model of CNC Machine: Shark Pro HD and CNCrouterparts 4896

Re: Mantel vertical posts

Postby Rcnewcomb » Thu Mar 05, 2015 11:24 pm

in Alaska

Where are you in Alaska? I'm heading up to Bethel next month for the Camai festival.
- Randall Newcomb
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3668
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: Mantel vertical posts

Postby scottart » Mon Mar 09, 2015 2:40 am

Randall

all winter we are in Anchorage. All summer we go further north to a little Gallery in Willow, 70 miles north of Anchorage.

A Camel Festival....Really?
scottart
Vectric Craftsman
 
Posts: 245
Joined: Fri Jan 18, 2013 8:47 am
Location: Willow, Alaska
Model of CNC Machine: Shark Pro HD and CNCrouterparts 4896


Return to Aspire - Gallery

Who is online

Users browsing this forum: mickecarlsson and 7 guests