I met an Aspire customer, Rusty Dziubanek, at the IWF show last week who showed me the photos of his work on his phone. I was suitably impressed at the size and quality and asked him if I could post them on the forum here. These were designed and cut using Aspire on a Laguna CNC Router. Thanks to Rusty for sending these over to me.
Cheers,
James
Large Wildlife Carvings
-
- Vectric Wizard
- Posts: 1129
- Joined: Thu Jul 18, 2013 4:58 pm
- Model of CNC Machine: homebuild / VCP 8.0
Re: Large Wildlife Carvings
JamesB,
The gentleman does outstanding work!
Thanks for posting.
The gentleman does outstanding work!
Thanks for posting.
Re: Large Wildlife Carvings
WOW MAKES ME WONDER HOLD LONG THE CUT TOOK. LOOKS GREAT.
-
- Vectric Craftsman
- Posts: 101
- Joined: Tue Apr 16, 2013 1:06 am
- Model of CNC Machine: camaster stinger1 with recoil
- Location: Hamburg, New York
Re: Large Wildlife Carvings
WOW that is sharp he did some really nice work!!
-
- Vectric Craftsman
- Posts: 233
- Joined: Mon Dec 31, 2012 7:35 pm
- Model of CNC Machine: Shark Pro Plus HD & Custom built 4x4
- Location: Ohio
Re: Large Wildlife Carvings
Very nice work. Now that I have a larger machine I'm contemplating doing something along these lines in my dining room when I'm done remodeling it.
- dhellew2
- Vectric Wizard
- Posts: 1326
- Joined: Thu May 22, 2008 10:14 pm
- Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
- Location: Royal City Washington
Re: Large Wildlife Carvings
What can I say but great work and WOW! dh
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale
Young = time, no money
Old = money, no time
Dale
-
- Vectric Wizard
- Posts: 823
- Joined: Tue Jun 01, 2010 4:51 pm
- Model of CNC Machine: CAMaster MC4848
- Location: Prescott AZ
Re: Large Wildlife Carvings
That is really nice!!!
Did he say how he did it? Looks like it is one piece of wood, even the top and bottom molding. I don't see any places where he joined the wood. This guy is a very skilled woodworker.
Mark
Did he say how he did it? Looks like it is one piece of wood, even the top and bottom molding. I don't see any places where he joined the wood. This guy is a very skilled woodworker.
Mark
-
- Vectric Wizard
- Posts: 1129
- Joined: Thu Jul 18, 2013 4:58 pm
- Model of CNC Machine: homebuild / VCP 8.0
Re: Large Wildlife Carvings
If I had to guess, maybe 4" or so strips held together on router table, tiled toolpaths, then edges slightly beveled on jointer to make the curve?MarkJohnston wrote:That is really nice!!!
Did he say how he did it? Looks like it is one piece of wood, even the top and bottom molding. I don't see any places where he joined the wood. This guy is a very skilled woodworker.
Mark
But your right, the look is seamless on the curved wall.
- Leo
- Vectric Wizard
- Posts: 4091
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Large Wildlife Carvings
WOW - AWESOME
It is amazing what some ingenuity can do.
And to thing - we have all of this at out finger tips.
Thank you so much for posting that.
It is amazing what some ingenuity can do.
And to thing - we have all of this at out finger tips.
Thank you so much for posting that.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
- Mike-S
- Vectric Wizard
- Posts: 1123
- Joined: Mon Jun 13, 2011 6:45 am
- Model of CNC Machine: Joe's Hybrid 4x4 (but 3x3)
- Location: Hayesville, NC
Re: Large Wildlife Carvings
I was thinking a two rail sweep with a huge radius third vector.
However he did it, it's a great carving.
However he did it, it's a great carving.