corian sign

Post by **stankern** » Mon Jul 07, 2014 8:54 pm

corian sign
turned out nicely

Post by **Leo** » Mon Jul 07, 2014 10:41 pm

Sweet

What is that little mark over the "A"

Post by **Samson** » Mon Jul 07, 2014 11:07 pm

It looks nice.
IMHO, I would have fit the text to the shape. It looks a little out of place to me with the profile and the inner oval. It doesn't look centered based on the spacing between the first and last letter off the edge. I know sometimes pics make things look goofy. Maybe a little kerning too.

Post by **stankern** » Tue Jul 08, 2014 1:57 am

the little mark is the e accent ---french

Post by **stankern** » Tue Jul 08, 2014 1:58 am

and the design was customer requested,customer is right

GraClay · Post by **GraClay** » Wed Jul 09, 2014 11:23 am

The customer was wrong.

Post by **Lameiii** » Fri Jul 11, 2014 3:56 am

Love your plaques. I've done a couple of items with a couple of pieces of Corian I ran across. That source has gone so I'm looking for a place to obtain more.
Any ideas?

Jim

Post by **Samson** » Fri Jul 11, 2014 5:53 pm

Lameiii wrote:Love your plaques. I've done a couple of items with a couple of pieces of Corian I ran across. That source has gone so I'm looking for a place to obtain more.
Any ideas?

Jim

I'm fortunate to have a local manufacturer of solid surface, but you should be able to get some from cabinet shops and countertop manufacturers. They usually have drop-offs that they will either sell cheap or even give to you.

Post by **dhellew2** » Fri Jul 18, 2014 11:43 pm

Check with your local cabinet shops for left-overs and keep checking on ebay... dh

Post by **dhellew2** » Sat Jul 19, 2014 6:56 pm

For those that don't yet know how... these are the steps I take to fit text to a curve

Vectric Customer

corian sign

corian sign

Re: corian sign

Re: corian sign

Re: corian sign

Re: corian sign

Re: corian sign

Re: corian sign

Re: corian sign

Re: corian sign

Re: corian sign