corian sign

This is the place to post images of work produced using Aspire

corian sign

Postby stankern » Mon Jul 07, 2014 8:54 pm

http://youtu.be/q6mWM-9ntR0 corian sign
turned out nicely
Attachments
bare2.jpg
painted 3.jpg
stankern
Vectric Wizard
 
Posts: 516
Joined: Tue Nov 27, 2007 3:21 pm
Location: ontario canada

Re: corian sign

Postby Leo » Mon Jul 07, 2014 10:41 pm

Sweet

What is that little mark over the "A"
Imagine the Possibilities of a Creative mind

www.leosworkshop.com
User avatar
Leo
Vectric Wizard
 
Posts: 2989
Joined: Sat Jul 14, 2007 3:02 am
Location: East Freetown, Ma.
Model of CNC Machine: 1300 x 1300 x 254

Re: corian sign

Postby Samson » Mon Jul 07, 2014 11:07 pm

It looks nice.
IMHO, I would have fit the text to the shape. It looks a little out of place to me with the profile and the inner oval. It doesn't look centered based on the spacing between the first and last letter off the edge. I know sometimes pics make things look goofy. Maybe a little kerning too. :wink:
Samson
Vectric Wizard
 
Posts: 323
Joined: Fri May 02, 2014 10:14 pm
Model of CNC Machine: 4x4

Re: corian sign

Postby stankern » Tue Jul 08, 2014 1:57 am

the little mark is the e accent ---french
stankern
Vectric Wizard
 
Posts: 516
Joined: Tue Nov 27, 2007 3:21 pm
Location: ontario canada

Re: corian sign

Postby stankern » Tue Jul 08, 2014 1:58 am

and the design was customer requested,customer is right
stankern
Vectric Wizard
 
Posts: 516
Joined: Tue Nov 27, 2007 3:21 pm
Location: ontario canada

Re: corian sign

Postby GraClay » Wed Jul 09, 2014 11:23 am

The customer was wrong.
GraClay
 

Re: corian sign

Postby Lameiii » Fri Jul 11, 2014 3:56 am

Love your plaques. I've done a couple of items with a couple of pieces of Corian I ran across. That source has gone so I'm looking for a place to obtain more.
Any ideas?

Jim
Lameiii
Vectric Craftsman
 
Posts: 189
Joined: Thu Dec 16, 2010 5:50 pm
Location: Dupo, IL
Model of CNC Machine: Romaxx WD1

Re: corian sign

Postby Samson » Fri Jul 11, 2014 5:53 pm

Lameiii wrote:Love your plaques. I've done a couple of items with a couple of pieces of Corian I ran across. That source has gone so I'm looking for a place to obtain more.
Any ideas?

Jim



I'm fortunate to have a local manufacturer of solid surface, but you should be able to get some from cabinet shops and countertop manufacturers. They usually have drop-offs that they will either sell cheap or even give to you.
Samson
Vectric Wizard
 
Posts: 323
Joined: Fri May 02, 2014 10:14 pm
Model of CNC Machine: 4x4

Re: corian sign

Postby dhellew2 » Fri Jul 18, 2014 11:43 pm

Check with your local cabinet shops for left-overs and keep checking on ebay... dh
You will get old if you live long enough!

Dale
User avatar
dhellew2
Vectric Wizard
 
Posts: 1204
Joined: Thu May 22, 2008 10:14 pm
Location: Royal City Washington
Model of CNC Machine: Legacy Artisan 72

Re: corian sign

Postby dhellew2 » Sat Jul 19, 2014 6:56 pm

For those that don't yet know how... these are the steps I take to fit text to a curve
Attachments
offset.png
offset ellipse.png
cut vector.png
start point.png
finished curved text.png
You will get old if you live long enough!

Dale
User avatar
dhellew2
Vectric Wizard
 
Posts: 1204
Joined: Thu May 22, 2008 10:14 pm
Location: Royal City Washington
Model of CNC Machine: Legacy Artisan 72


Return to Aspire - Gallery

Who is online

Users browsing this forum: No registered users and 4 guests