Help with Project to Surface

This is the place to post images of work produced using Aspire

Help with Project to Surface

Postby Len-Tikular » Tue Jan 28, 2014 11:03 pm

I need a little help with projecting my Alvis text and triangle onto a domed piece of Aluminum.
I only need to carve 3/4mm deep but I want to ensure even depth on the workpiece.


I.m using the 'Project vector' onto the workpiece but it's not working for me. Clearly I've missed the point.

I would appreciate any help.

Many thanks
Attachments
Image1.jpg
Alvis.crv3d
(37 KiB) Downloaded 90 times
Len-Tikular (A glider pilots dream cloud)

Aspire v4.0
User avatar
Len-Tikular
Vectric Wizard
 
Posts: 367
Joined: Sat Feb 13, 2010 11:27 am
Location: Denholm Scotland.
Model of CNC Machine: Home made revision 3

Re: Help with Project to Surface

Postby Mike-S » Tue Jan 28, 2014 11:25 pm

Can you post what is going wrong.
Seems OK to me.
Attachments
alvis.jpg
User avatar
Mike-S
Vectric Wizard
 
Posts: 1092
Joined: Mon Jun 13, 2011 6:45 am
Location: Hayesville, NC
Model of CNC Machine: Joe's Hybrid 4x4 (but 3x3)

Re: Help with Project to Surface

Postby Len-Tikular » Wed Jan 29, 2014 1:15 pm

Many thanks for your reply,

Can you help with the process you followed and what is the best tool to use considering I only want to go 30 to 40 thou deep.

I created a component from a circled and then applied a 10 degree dome to it,
I then created my toolpath and mapped the log to the surface.

Also, I need the reverse of what you have shown. Please see pic attached.

Many thanks

George
Attachments
alvis_wheel.jpg
Len-Tikular (A glider pilots dream cloud)

Aspire v4.0
User avatar
Len-Tikular
Vectric Wizard
 
Posts: 367
Joined: Sat Feb 13, 2010 11:27 am
Location: Denholm Scotland.
Model of CNC Machine: Home made revision 3

Re: Help with Project to Surface

Postby Mike-S » Wed Jan 29, 2014 3:58 pm

You need to shrink the logo a little and then put an off-set vector (3-4mm) around the triangle. That provides the needed second vector to do the V-carve. Try a 90 deg V-bit.
Attachments
alvis2.jpg
User avatar
Mike-S
Vectric Wizard
 
Posts: 1092
Joined: Mon Jun 13, 2011 6:45 am
Location: Hayesville, NC
Model of CNC Machine: Joe's Hybrid 4x4 (but 3x3)


Return to Aspire - Gallery

Who is online

Users browsing this forum: Google [Bot] and 9 guests