Mantel vertical posts
-
- Vectric Craftsman
- Posts: 245
- Joined: Fri Jan 18, 2013 8:47 am
- Model of CNC Machine: Shark Pro HD and CNCrouterparts 4896
- Location: Willow, Alaska
- Contact:
Mantel vertical posts
These are some Spruce vertical panels for a Mantel I am building.. Just out of the Shark. 11.5" x 46" x 1.7 deep.
-
- Vectric Wizard
- Posts: 1129
- Joined: Thu Jul 18, 2013 4:58 pm
- Model of CNC Machine: homebuild / VCP 8.0
Re: Mantel vertical posts
Very nice!
Did you model the 3d scene yourself?
Did you model the 3d scene yourself?
-
- Vectric Craftsman
- Posts: 245
- Joined: Fri Jan 18, 2013 8:47 am
- Model of CNC Machine: Shark Pro HD and CNCrouterparts 4896
- Location: Willow, Alaska
- Contact:
Re: Mantel vertical posts
The rod and reels, Bear tracks and Trout our mine, made in Aspire. the rocks are the "stones" file from Textures in that come with Aspire in the clip art file. I modified the rocks to get some fatter than the flat file.
-
- Vectric Craftsman
- Posts: 245
- Joined: Fri Jan 18, 2013 8:47 am
- Model of CNC Machine: Shark Pro HD and CNCrouterparts 4896
- Location: Willow, Alaska
- Contact:
Re: Mantel vertical posts
Here is a quick look at where the entire piece is going. these are just stacked because I have not seen all three components together yet. now a whole bunch of finish carving and sanding and all that other stuff. But you can start to see the theme and general composition.
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Mantel vertical posts
ANOTHER Nice piece!!
(I was wondering where the Salmon were )
(I was wondering where the Salmon were )
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- Leo
- Vectric Wizard
- Posts: 4091
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Mantel vertical posts
WOW that is simply amazing
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
- Mike-S
- Vectric Wizard
- Posts: 1123
- Joined: Mon Jun 13, 2011 6:45 am
- Model of CNC Machine: Joe's Hybrid 4x4 (but 3x3)
- Location: Hayesville, NC
Re: Mantel vertical posts
It keeps getting more impressive.
-
- Vectric Craftsman
- Posts: 245
- Joined: Fri Jan 18, 2013 8:47 am
- Model of CNC Machine: Shark Pro HD and CNCrouterparts 4896
- Location: Willow, Alaska
- Contact:
Re: Mantel vertical posts
i finished the mantel, this is it bolted together for an upcoming show, than off to installation in March. Fun project, all told about 44 hours in the Shark HD, dozens of tool changes, tile changes and a few errors that make me flinch.. but you can only see them when you zoom in .. so don't
-
- Posts: 22
- Joined: Tue Jan 15, 2013 12:58 am
- Model of CNC Machine: shopbot 48x96
Re: Mantel vertical posts
I see from your back ground decor that you are an avid out doors man. That's great and your love for the out doors shows through in your work! I also love that you picked pine as your wood type. Your project is wonderful and I hope you will post a picture once you have this installed with all the finale decorations in place. I love your choice of art you chose, where they from clip art? You did a wonderful job something to be very proud of for many years to come.
-
- Vectric Craftsman
- Posts: 245
- Joined: Fri Jan 18, 2013 8:47 am
- Model of CNC Machine: Shark Pro HD and CNCrouterparts 4896
- Location: Willow, Alaska
- Contact:
Re: Mantel vertical posts
Thanks for the kind words. Yes, i am an outdoorsman and an artist, the CNC stuff came after we opened up a Cabin styles / Mancave Store in Alaska.
all the art on the mantel and verticals, excepting only the rock tiles in the verticals is original creation i made in Aspire. I have been painting and power carving for many years. Finding affordable CNC equipment has just added greatly to what I can make and sell.
all the art on the mantel and verticals, excepting only the rock tiles in the verticals is original creation i made in Aspire. I have been painting and power carving for many years. Finding affordable CNC equipment has just added greatly to what I can make and sell.
- Rcnewcomb
- Vectric Archimage
- Posts: 5927
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Mantel vertical posts
Where are you in Alaska? I'm heading up to Bethel next month for the Camai festival.in Alaska
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
- Vectric Craftsman
- Posts: 245
- Joined: Fri Jan 18, 2013 8:47 am
- Model of CNC Machine: Shark Pro HD and CNCrouterparts 4896
- Location: Willow, Alaska
- Contact:
Re: Mantel vertical posts
Randall
all winter we are in Anchorage. All summer we go further north to a little Gallery in Willow, 70 miles north of Anchorage.
A Camel Festival....Really?
all winter we are in Anchorage. All summer we go further north to a little Gallery in Willow, 70 miles north of Anchorage.
A Camel Festival....Really?