'wavy' doors for bathroom vanity

This is the place to post images of work produced using Aspire

'wavy' doors for bathroom vanity

Postby rscrawford » Sun Jan 19, 2014 3:54 am

Decided to make some wavy doors for a bathroom vanity, so I could integrate the pulls into the wood. Had to do a little hand carving with gouges to undercut the pulls, but I think they turned out very nice.

Used 6/4 walnut, total carve time was 1hr 6 minutes (1/2" ball nose, 7% stopover, 600ipm with no rough cut, depth of carve was .75" maximum). Got them dry fit on one side of the vanity, still need to make the second side and the toe kicks, then apply the finish.

Bathroom doors.jpg


bathroom doors1.JPG


bathroom doors2.JPG


bathroom doors3.JPG


bathroom doors4.JPG
Russell Crawford
http://www.cherryleaf-rustle.com
User avatar
rscrawford
Vectric Wizard
 
Posts: 948
Joined: Mon Jan 17, 2011 6:49 pm
Location: Wetaskiwin, Alberta
Model of CNC Machine: CAMaster Cobra 408 ATC, ShopSabre IS408

Re: 'wavy' doors for bathroom vanity

Postby rsetina » Sun Jan 19, 2014 4:39 am

A beautiful design. It reminds me of work done by the late Sam Maloof. I like it.
Rick

Shark HD 2.0
rsetina
Vectric Craftsman
 
Posts: 188
Joined: Sun May 05, 2013 6:37 pm
Model of CNC Machine: Shark HD 2.0

Re: 'wavy' doors for bathroom vanity

Postby PaulRowntree » Sun Jan 19, 2014 4:42 am

That is beautiful Russell!
Paul Rowntree
WarpDriver, StandingWave, Topo and gadgets available at PaulRowntree.weebly.com
PaulRowntree
Vectric Wizard
 
Posts: 1687
Joined: Sun Oct 24, 2010 7:28 pm
Location: Guelph, Ontario
Model of CNC Machine: homebuilt 4'x2' (Mach3+G540)

Re: 'wavy' doors for bathroom vanity

Postby David Rueth » Sun Jan 19, 2014 1:18 pm

rscrawford

The drawers looks great and the wood looks stuning. Can't wait to see them fisished. (and I am sure I will not show this post to my wife)
David Rueth
Vectric Apprentice
 
Posts: 52
Joined: Mon Mar 26, 2012 10:24 pm
Location: Langhorne PA. USA
Model of CNC Machine: Shark Pro Plus HD

Re: 'wavy' doors for bathroom vanity

Postby zeeway » Sun Jan 19, 2014 1:31 pm

That is stunning, Russell.

Angie
User avatar
zeeway
Vectric Wizard
 
Posts: 3157
Joined: Thu Feb 11, 2010 9:24 pm
Location: SC, USA
Model of CNC Machine: Self-built

Re: 'wavy' doors for bathroom vanity

Postby mtylerfl » Sun Jan 19, 2014 1:46 pm

I really like how you've done this! Very sleek and flowing - beautiful!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
User avatar
mtylerfl
Vectric Wizard
 
Posts: 4086
Joined: Thu Jan 29, 2009 3:54 am
Location: Brunswick, GA
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha

Re: 'wavy' doors for bathroom vanity

Postby Mike-S » Sun Jan 19, 2014 4:42 pm

Came out great. Love the flow and choice of wood.
User avatar
Mike-S
Vectric Wizard
 
Posts: 1094
Joined: Mon Jun 13, 2011 6:45 am
Location: Hayesville, NC
Model of CNC Machine: Joe's Hybrid 4x4 (but 3x3)

Re: 'wavy' doors for bathroom vanity

Postby berzerko » Sun Jan 26, 2014 6:06 pm

really like it.. reminds me of a dresser i built 25 years ago, except I had to use hand routers chisels and rasps

how did you create the paths ?
berzerko
Vectric Apprentice
 
Posts: 15
Joined: Sat Sep 28, 2013 6:37 pm
Location: new york
Model of CNC Machine: techno lc+

Re: 'wavy' doors for bathroom vanity

Postby galerdude » Sun Jan 26, 2014 6:48 pm

Like it a lot!
Very Inspiring.
Regards,
Gale
User avatar
galerdude
Vectric Apprentice
 
Posts: 176
Joined: Sun Dec 12, 2010 7:39 am
Location: Spokane, WA USA
Model of CNC Machine: Joe's 4x4 Hybrid R&P Evolution

Re: 'wavy' doors for bathroom vanity

Postby rscrawford » Sun Jan 26, 2014 10:51 pm

berzerko wrote:really like it.. reminds me of a dresser i built 25 years ago, except I had to use hand routers chisels and rasps

how did you create the paths ?


2 rail sweeps for the design, and then just a raster finish tool path with a 1/2" ball nose. Then I had to create the undercut for the handles with hand tools (gouges).
Russell Crawford
http://www.cherryleaf-rustle.com
User avatar
rscrawford
Vectric Wizard
 
Posts: 948
Joined: Mon Jan 17, 2011 6:49 pm
Location: Wetaskiwin, Alberta
Model of CNC Machine: CAMaster Cobra 408 ATC, ShopSabre IS408

Re: 'wavy' doors for bathroom vanity

Postby glenninvb » Sun Jan 26, 2014 11:46 pm

The grain is matched perfect, was that one big 6/4 slab?
Very nice work
glenninvb
Vectric Wizard
 
Posts: 1129
Joined: Thu Jul 18, 2013 4:58 pm
Model of CNC Machine: homebuild / VCP 8.0

Re: 'wavy' doors for bathroom vanity

Postby rscrawford » Mon Jan 27, 2014 3:16 am

4 pieces glued up, out of 2 separate boards. I buy my wood in 1000bf lifts, and it usually comes well matched for colour.
Russell Crawford
http://www.cherryleaf-rustle.com
User avatar
rscrawford
Vectric Wizard
 
Posts: 948
Joined: Mon Jan 17, 2011 6:49 pm
Location: Wetaskiwin, Alberta
Model of CNC Machine: CAMaster Cobra 408 ATC, ShopSabre IS408

Re: 'wavy' doors for bathroom vanity

Postby DDWALKER » Mon Jan 27, 2014 3:42 am

I really like these. Thanks for sharing.
User avatar
DDWALKER
Vectric Craftsman
 
Posts: 161
Joined: Tue Jul 10, 2012 7:17 am
Location: Nebraska
Model of CNC Machine: Homemade-Running Mach3

Re: 'wavy' doors for bathroom vanity

Postby bill_w » Mon Jan 27, 2014 12:36 pm

Very nice, excellent work.
Computers-Yuk....I should junk it...It never does what it should do...only what I tell it.
User avatar
bill_w
Vectric Wizard
 
Posts: 435
Joined: Wed Sep 08, 2010 12:19 pm
Location: Milwaukee,WI
Model of CNC Machine: PRSalpha BT48


Return to Aspire - Gallery

Who is online

Users browsing this forum: No registered users and 13 guests