Toy Cars

This is the place to post images of work produced using Aspire

Toy Cars

Postby dhellew2 » Wed Mar 13, 2013 7:01 pm

I promised I would post some plans for toy cars. To align the fenders on the body I use a couple of axle pegs, sanded and waxed so the glue won't stick. Remove glue squeeze out with a plastic drinking straw. When gluing I use my finger and remove about a 1/8" strip around the outside of the fender to minimize squeeze out. Fenders and body parts are rounded with a round-over bit on a shaper or router table. I buy the wheels and axle pegs already made. If you want black wheels, use water based alanine dye.
P1010616.JPG

1910 to 1929 model t fenders 32x5.375x.875.crv3d
(1.55 MiB) Downloaded 809 times

1912 ford roadster body.crv3d
(892.5 KiB) Downloaded 720 times

1926 model t tudor 27x5.75x1.25.crv3d
(725.5 KiB) Downloaded 624 times

1927 model t sedan 27x5.75x1.25.crv3d
(814 KiB) Downloaded 633 times
1924 model t ford body.crv3d
(735.5 KiB) Downloaded 1079 times

1924 model t ford body.crv3d
(735.5 KiB) Downloaded 1079 times



Remember to search on toy cars because I will be posting more someday.
Dale
You will get old if you live long enough!

Dale
User avatar
dhellew2
Vectric Wizard
 
Posts: 1199
Joined: Thu May 22, 2008 10:14 pm
Location: Royal City Washington
Model of CNC Machine: Legacy Artisan 72

Re: Toy Cars

Postby dhellew2 » Wed Mar 13, 2013 7:08 pm

More cars. Dale
1917 model t touring body.crv3d
(801.5 KiB) Downloaded 654 times

1917 model t woody wagon.crv3d
(911 KiB) Downloaded 599 times

fire truck fenders 2 in.crv3d
(1.13 MiB) Downloaded 613 times

fire truck body 2.0 wheels.crv3d
(666 KiB) Downloaded 638 times

1927 model t pickup body.crv3d
(754.5 KiB) Downloaded 649 times

1927 model t pu fenders.crv3d
(1.66 MiB) Downloaded 647 times
You will get old if you live long enough!

Dale
User avatar
dhellew2
Vectric Wizard
 
Posts: 1199
Joined: Thu May 22, 2008 10:14 pm
Location: Royal City Washington
Model of CNC Machine: Legacy Artisan 72

Re: Toy Cars

Postby PaulRowntree » Wed Mar 13, 2013 7:46 pm

That is a very fine fleet! I think my kids are a bit old for this now, but there are always the grandkids!

PS : Thank you very much!
Last edited by PaulRowntree on Wed Mar 13, 2013 7:53 pm, edited 1 time in total.
Paul Rowntree
WarpDriver, StandingWave, Topo and gadgets available at PaulRowntree.weebly.com
PaulRowntree
Vectric Wizard
 
Posts: 1687
Joined: Sun Oct 24, 2010 7:28 pm
Location: Guelph, Ontario
Model of CNC Machine: homebuilt 4'x2' (Mach3+G540)

Re: Toy Cars

Postby samr77 » Wed Mar 13, 2013 7:48 pm

Thank you.
Would like to try some of these.
samr77
 
Posts: 23
Joined: Sun Dec 04, 2011 8:48 pm
Model of CNC Machine: Shark Pro Plus HD

Re: Toy Cars

Postby JMD » Wed Mar 13, 2013 8:12 pm

dhellew2 wrote:I promised I would post some plans for toy cars. To align the fenders on the body I use a couple of axle pegs, sanded and waxed so the glue won't stick. Remove glue squeeze out with a plastic drinking straw. When gluing I use my finger and remove about a 1/8" strip around the outside of the fender to minimize squeeze out. Fenders and body parts are rounded with a round-over bit on a shaper or router table. I buy the wheels and axle pegs already made. If you want black wheels, use water based alanine dye.
P1010616.JPG

1910 to 1929 model t fenders 32x5.375x.875.crv3d

1912 ford roadster body.crv3d

1926 model t tudor 27x5.75x1.25.crv3d

1927 model t sedan 27x5.75x1.25.crv3d
1924 model t ford body.crv3d

1924 model t ford body.crv3d



Remember to search on toy cars because I will be posting more someday.
Dale


wish those were in V-Carve.
JMD
Vectric Craftsman
 
Posts: 186
Joined: Sun Apr 03, 2011 3:07 pm
Location: Erie, PA
Model of CNC Machine: Shark Pro

Re: Toy Cars

Postby Redhorse » Wed Mar 13, 2013 8:54 pm

Dale, Thanks for the carve files. I'm thinking I'll be carving each one. Birthdays and Christmas come to mind.

Thanks again,

Dave
Redhorse
Vectric Apprentice
 
Posts: 63
Joined: Thu Feb 28, 2008 5:39 am
Location: Richfield, Ohio
Model of CNC Machine: Camaster Stinger 1

Re: Toy Cars

Postby Ms Wolffie » Wed Mar 13, 2013 10:06 pm

Thank you very very much for the files :D
I have just ordered a smaller 6040 machine.
This will be perfect for that machine.
Cheers
Wolffie
Cheers
Wolffie

Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
User avatar
Ms Wolffie
Vectric Wizard
 
Posts: 2689
Joined: Sat Mar 31, 2012 10:41 pm
Location: Tully Heads, Wet Tropics, Queensland, Australia
Model of CNC Machine: Blue Elephant 1325, Shark HD Pro

Re: Toy Cars

Postby zeeway » Wed Mar 13, 2013 10:30 pm

Thank you, Dale. Looks like I will be working on wooden cars in the future.

Angie
User avatar
zeeway
Vectric Wizard
 
Posts: 3157
Joined: Thu Feb 11, 2010 9:24 pm
Location: SC, USA
Model of CNC Machine: Self-built

Re: Toy Cars

Postby MarkJohnston » Wed Mar 13, 2013 11:28 pm

Thank you Dale that is most generous!!!

Every year at Christmas our Church sends gifts to kids all around the world, this year I plan on making a contribution using your files that I downloaded.
Also thanks for the building tips. What type of wood and finish do you use? I assume a child save finish and where do you get the wheels and axles?

Thanks,

Mark
MarkJohnston
Vectric Wizard
 
Posts: 803
Joined: Tue Jun 01, 2010 4:51 pm
Location: Prescott AZ
Model of CNC Machine: CAMaster MC4848

Re: Toy Cars

Postby cdrd03 » Thu Mar 14, 2013 1:21 am

Thanks posting these files. You are very generous.

Chuck
cdrd03
 
Posts: 22
Joined: Wed May 09, 2012 4:39 am
Model of CNC Machine: DIY Wooden Router

Re: Toy Cars

Postby tonydude919 » Thu Mar 14, 2013 5:52 am

Thank you so much for the files. Will be making them for when I have grand kids in couple years.

Tony
What will matter is not what you bought but what you built; not what you got, but what you gave
tonydude919
Vectric Wizard
 
Posts: 757
Joined: Sat Jan 09, 2010 7:28 am
Location: Buffalo,NY
Model of CNC Machine: cnc mako shark extended bed

Re: Toy Cars

Postby Jozua » Thu Mar 14, 2013 7:43 am

Thank you Dale

This generous offer will come in very handy for my next project.

Our church bazaar is in about a months’ time and they are asking conurbations for the “White Elephant” table.

I guess I will have to get busy and include some of these as “white elephants” together with Michael’s Paradise Box that I adapted to a Bible Box and of course three of the stunning Tripod Pedestal Tables.

Joz
Jozua
Vectric Wizard
 
Posts: 372
Joined: Wed Nov 19, 2008 7:28 pm
Location: Bronkhorstspruit, South Africa
Model of CNC Machine: EZ-Router

Re: Toy Cars

Postby WoodEraser » Thu Mar 14, 2013 1:40 pm

Thank you Dale These will come handy for Birthdays and Christmas.
Eric
The WoodEraser

Liberty Twp (N. of Cincinnati & S. of Dayton) Ohio
WoodEraser
Vectric Apprentice
 
Posts: 198
Joined: Wed Aug 08, 2012 6:30 pm
Location: Liberty Twp (N. Cincinnati) OH
Model of CNC Machine: Shark Pro Plus

Re: Toy Cars

Postby cessna152 » Thu Mar 14, 2013 1:56 pm

Thanks Dale! My Dad will enjoy these.

Scott
cessna152
Vectric Apprentice
 
Posts: 56
Joined: Tue Nov 16, 2010 1:36 am

Re: Toy Cars

Postby highway » Thu Mar 14, 2013 2:07 pm

Dale

Thank you for the files , also the time and effort

highway
legacy arty 58, vcarve pro, cut 3d, photo vcarve, 3d machinist, aspire,Turbocad 18,coreldraw x5
highway
Vectric Apprentice
 
Posts: 55
Joined: Sun Jul 25, 2010 3:04 pm
Location: Knoxville Tennessee
Model of CNC Machine: legacy artie 56

Next

Return to Aspire - Gallery

Who is online

Users browsing this forum: No registered users and 6 guests