Went on a breaking bad marathon recently, and was inspired to make a couple of night lights of the notorious Walter White aka Heisenberg.
They are about 4x4" and made out of corian of course. I like them both, one is brighter than the other because it is not mounted in the night light yet and is in front of a big bulb, compared to the dinky night light bulb. Bulbs are never the ideal solution to backlighting as they always leave a hot spot, not sure what the ideal solution would be for something this small.
Heisenberg night lights
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
- Xxray
- Vectric Wizard
- Posts: 2300
- Joined: Thu Feb 17, 2011 8:47 am
- Model of CNC Machine: CAMaster Stinger 1
- Location: MI USA
Re: Heisenberg night lights
Yeah, I was impressed with the detail as well [not always am]. Small as they are, took about 2 hours each so thats probably why.
Don't care for the dent in his head on the first one though, didn't notice it before I cut it but thats the way it is in the pic
https://www.kunstnet.org/werk/463433-he ... -nach-foto
Probably meant to be a shadow
Don't care for the dent in his head on the first one though, didn't notice it before I cut it but thats the way it is in the pic
https://www.kunstnet.org/werk/463433-he ... -nach-foto
Probably meant to be a shadow
Doug
Re: Heisenberg night lights
Great job, just curious, where do you plan to display that?
Phil
Phil
- Xxray
- Vectric Wizard
- Posts: 2300
- Joined: Thu Feb 17, 2011 8:47 am
- Model of CNC Machine: CAMaster Stinger 1
- Location: MI USA
Re: Heisenberg night lights
I don't really, though any plug would do.Phil wrote:Great job, just curious, where do you plan to display that?
Phil
I'm in the habit of making stuff just because I can, and possibly sell or give away somewhere down the line.
Doug
- mtylerfl
- Vectric Archimage
- Posts: 5865
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Heisenberg night lights
Ha! I think that’s what happens with all the Aztec calendars folks make, too!Xxray wrote:
I'm in the habit of making stuff just because I can, and possibly sell or give away somewhere down the line.
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- mtylerfl
- Vectric Archimage
- Posts: 5865
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Heisenberg night lights
ROTFL
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC