Harley-Davidson single Key Holder
- Buelman
- Posts: 26
- Joined: Sat Jan 28, 2012 7:24 am
- Model of CNC Machine: Jcut6090-A
- Location: Brisbane, Australia
- Contact:
Harley-Davidson single Key Holder
Think this will come in handy for some, maybe as a gift for someone!
I designed this on Apire3,5 as a "Beginners-PROJECT" it's not fully step by step but give you enough info to follow the project through.
You can download the files here http://www.craftconnectonline.com/beginner.html and include the Aspire3.5 file (.crv3d)
All was done on my Juct6090A cnc router.
Hope this is useful for some.
Rudolph
I designed this on Apire3,5 as a "Beginners-PROJECT" it's not fully step by step but give you enough info to follow the project through.
You can download the files here http://www.craftconnectonline.com/beginner.html and include the Aspire3.5 file (.crv3d)
All was done on my Juct6090A cnc router.
Hope this is useful for some.
Rudolph
RF
Designs...For the extreme cnc hobbyist
www.cncsmartcut.weebly.com
Designs...For the extreme cnc hobbyist
www.cncsmartcut.weebly.com
Re: Harley-Davidson single Key Holder
Rudolph,
Thanks for posting the Harley project. Finished setting up my new machine yesterday and that was my first run project.
Buc
Thanks for posting the Harley project. Finished setting up my new machine yesterday and that was my first run project.
Buc
- fretsman68
- Vectric Wizard
- Posts: 1084
- Joined: Tue Sep 02, 2008 7:16 pm
- Location: Pa. USA
Re: Harley-Davidson single Key Holder
What a very nice looking free project you've put together, I'm sure there are a lot of Aspire users that appreciate the time and effort that went into this.
I do not have Aspire (VCarve Pro user) but wanted to chime in and say thanks for your efforts.
Dave
I do not have Aspire (VCarve Pro user) but wanted to chime in and say thanks for your efforts.
Dave
--------------
Dave
Dave
-
- Vectric Wizard
- Posts: 862
- Joined: Wed Aug 16, 2006 7:34 pm
- Model of CNC Machine: shopbot 48x48 upgraded prt
- Location: Monessen, Pa
- Contact:
Re: Harley-Davidson single Key Holder
thank you for your genorosity . that file will come in handy with a few of my friends on their birthday.
Thanks once again
Bob
Thanks once again
Bob
- zeeway
- Vectric Wizard
- Posts: 3157
- Joined: Thu Feb 11, 2010 9:24 pm
- Model of CNC Machine: Self-built
- Location: SC, USA
Re: Harley-Davidson single Key Holder
Thank you, kindly. I have a Harley rider in my neighborhood, and I am sure he will appreciate this.
Angie
Angie
- Greasetattoo
- Vectric Wizard
- Posts: 854
- Joined: Sat Mar 24, 2007 3:14 pm
- Location: Saint Paul, Minnesota
- Contact:
Re: Harley-Davidson single Key Holder
Here is one I made awhile back!
Love yours!
Love yours!
- Norway 69
- Vectric Apprentice
- Posts: 56
- Joined: Fri May 13, 2011 8:20 am
- Model of CNC Machine: CNC router XJ1218
- Location: Arendal Norway
Re: Harley-Davidson single Key Holder
Nice little project, I like the white outline on the letters. Did you paint with first white and then black?
-
- Posts: 39
- Joined: Mon Jun 11, 2007 8:46 pm
- Model of CNC Machine: Home Built
- Location: Sacramento, CA U.S.A.
Re: Harley-Davidson single Key Holder
I really like that project but I was wondering, can it be cut with VCarve Pro v5.5 That's the software I have and haven't found a real need to upgrade at this point.
Very nice job!
Very nice job!
- Buelman
- Posts: 26
- Joined: Sat Jan 28, 2012 7:24 am
- Model of CNC Machine: Jcut6090-A
- Location: Brisbane, Australia
- Contact:
Re: Harley-Davidson single Key Holder
1) First- More about the material I used: Laminate floors the vinyl type that measure 4mm in thickness. Although laminate flooring looks like wood, there is actually no solid wood used in its construction. laminate is topped with a high resolution photographic image that gives you the impression of natural wood.Norway 69 wrote:Nice little project, I like the white outline on the letters. Did you paint with first white and then black?
2) Didn't use any paint on this project just normal shoe polish to blacken the deep groove engraving and the white around the lettering is the natural effect of the synthetic laminate vinyl floor planks when you cut thru the high photographic image on top. You can enhance the effect a little bit by rubbing over the carve using scouring pads but DO NOT overdo it! some more detail with images can be seen here http://www.thekeybutler.com/faq.html
Buelman
RF
Designs...For the extreme cnc hobbyist
www.cncsmartcut.weebly.com
Designs...For the extreme cnc hobbyist
www.cncsmartcut.weebly.com
- Buelman
- Posts: 26
- Joined: Sat Jan 28, 2012 7:24 am
- Model of CNC Machine: Jcut6090-A
- Location: Brisbane, Australia
- Contact:
Re: Harley-Davidson single Key Holder
No need to upgrade, Mate. Done it for you in VCarve 5.5 download as well.GAWnCA wrote:I really like that project but I was wondering, can it be cut with VCarve Pro v5.5 That's the software I have and haven't found a real need to upgrade at this point.
Very nice job!
Buelman
RF
Designs...For the extreme cnc hobbyist
www.cncsmartcut.weebly.com
Designs...For the extreme cnc hobbyist
www.cncsmartcut.weebly.com
-
- Vectric Craftsman
- Posts: 270
- Joined: Thu Dec 03, 2009 7:36 am
- Model of CNC Machine: CAMaster 508 ATC + Rotary
- Location: Snohomish, WA
- Contact:
Re: Harley-Davidson single Key Holder
Great project Buelman .... where do you buy your key holders.
Mick Martin
Aspire 4.015
http://mickmartinwoodworking.com/
Aspire 4.015
http://mickmartinwoodworking.com/
- Buelman
- Posts: 26
- Joined: Sat Jan 28, 2012 7:24 am
- Model of CNC Machine: Jcut6090-A
- Location: Brisbane, Australia
- Contact:
Re: Harley-Davidson single Key Holder
There are abbundince of stainless steel hooks on the market and most of them are made in China but packed for your local hardware store ours are " Bunnings " but that is in Australia and I find a website http://hookz.com.au/Mick Martin wrote:Great project Buelman .... where do you buy your key holders.
I sujest you just modify the "Hook Pocket" to suite the hook closeced to the one I used and if you need help I do my best!
Buelman
RF
Designs...For the extreme cnc hobbyist
www.cncsmartcut.weebly.com
Designs...For the extreme cnc hobbyist
www.cncsmartcut.weebly.com
-
- Posts: 39
- Joined: Mon Jun 11, 2007 8:46 pm
- Model of CNC Machine: Home Built
- Location: Sacramento, CA U.S.A.
Re: Harley-Davidson single Key Holder
Rudolph, I tried to go to the link and it didn't work. Also I don't have Apire can i be done with VCarve Pro 5? We may have talked in the past and I got your help but since then I had a minor stroke and the VA is doing their best to keep me from having another. I'd love to make one of these for a friend who has done a lot of helping since the stroke and heart attack. Thanks and I love the looks and idea. Greg
Buelman wrote:Think this will come in handy for some, maybe as a gift for someone!
I designed this on Apire3,5 as a "Beginners-PROJECT" it's not fully step by step but give you enough info to follow the project through.
You can download the files here http://www.craftconnectonline.com/beginner.html and include the Aspire3.5 file (.crv3d)
All was done on my Juct6090A cnc router.
Hope this is useful for some.
Rudolph
- Teepaco
- Posts: 38
- Joined: Fri Dec 17, 2010 4:53 am
- Model of CNC Machine: Home Built 4x4 steel and 1/2 alumimun
- Location: Opelousas, Louisiana
Re: Harley-Davidson single Key Holder
Hi GAWnCA
After reading your post, I remembered that I had that file somewhere on my computer. I did find it and the original was in Aspire and metric. I had a little time on my hands…. so I converted into V-Crave 5 for you are anyone else that my need it. I also convert it to inches and created new tool paths. Always remember "CHECK TOOLING PATHS" that were created by someone else before running on your machine!
This is not my design, so I hope I didn't offend anyone in any way. Just trying to help out fellow CNC’ers
Enjoy,
Teepaco
EDITED BY ADMIN - I'm afraid we have had to remove the file with the Harley Davidson logo as this is a copyrighted design and Harley Davidson are extremely protective of their logo
After reading your post, I remembered that I had that file somewhere on my computer. I did find it and the original was in Aspire and metric. I had a little time on my hands…. so I converted into V-Crave 5 for you are anyone else that my need it. I also convert it to inches and created new tool paths. Always remember "CHECK TOOLING PATHS" that were created by someone else before running on your machine!
This is not my design, so I hope I didn't offend anyone in any way. Just trying to help out fellow CNC’ers
Enjoy,
Teepaco
EDITED BY ADMIN - I'm afraid we have had to remove the file with the Harley Davidson logo as this is a copyrighted design and Harley Davidson are extremely protective of their logo
- Attachments
-
- Hook Pocket.crv
- (63 KiB) Downloaded 345 times
-
- Vectric Craftsman
- Posts: 198
- Joined: Wed Aug 08, 2012 6:30 pm
- Model of CNC Machine: Shark Pro Plus
- Location: Liberty Twp (N. Cincinnati) OH
Re: Harley-Davidson single Key Holder
Thanks for the files.
I also use VCarve Pro.
This will make a good Christmas present.
Thanks again!
I also use VCarve Pro.
This will make a good Christmas present.
Thanks again!
Eric
The WoodEraser
Liberty Twp (N. of Cincinnati & S. of Dayton) Ohio
The WoodEraser
Liberty Twp (N. of Cincinnati & S. of Dayton) Ohio