here's a quick thing i made on my joe's hybrid
out of a piece of scrap 2 x 12
i used a bowl bit from rocklers and pocketed it 1 inch deep
only took 15 min total, so it's just a quick project for the holidays....
using up some scraps from building
a seasonal bowl
- sawmiller
- Vectric Wizard
- Posts: 531
- Joined: Sat May 03, 2008 8:34 pm
- Model of CNC Machine: joe's rack and pinion hybrid
- Location: camden,tn
a seasonal bowl
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn
In the heart of Tn