"You've Captured My Heart" - Vectric Project - FREE to all

This is the place to post images of work produced using Aspire

Re: "You've Captured My Heart" - Vectric Project - FREE to all

Postby BrianM » Sun Feb 13, 2011 11:49 pm

Phil wrote:...
Chuffed?

I'm sure it's a compliment but please translate "chuffed" for us Yanks :D



Chuffed = Very Pleased :D
Brian Moran
Managing Director
Vectric Ltd.
User avatar
BrianM
Vectric Staff
 
Posts: 1957
Joined: Mon May 16, 2005 10:15 am
Location: Redditch U.K

Re: "You've Captured My Heart" - Vectric Project - FREE to all

Postby mtylerfl » Mon Feb 14, 2011 12:26 am

BrianM wrote:
Chuffed = Very Pleased :D


I'm chuffed, too, Brian! You did a fantastic job!!

P.S. - thanks for increasing my vocabulary!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
User avatar
mtylerfl
Vectric Wizard
 
Posts: 3160
Joined: Thu Jan 29, 2009 3:54 am
Location: Brunswick, GA
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha

Re: "You've Captured My Heart" - Vectric Project - FREE to all

Postby myshadowboxes » Mon Feb 14, 2011 3:09 am

Thanks for the 2.5 downgrade : ) Wife is leaving for business early tomorrow so we exchanged gifts tonight. I did one for her and one for my daughter. I am so in with both of them right now : )
Attachments
Heart small.jpg
myshadowboxes
Vectric Apprentice
 
Posts: 55
Joined: Sun Sep 07, 2008 12:19 am
Location: Holt Florida
Model of CNC Machine: Camaster Stinger

Re: "You've Captured My Heart" - Vectric Project - FREE to all

Postby calgrdnr » Mon Feb 14, 2011 6:23 am

Great work guys.

Brian, correct me if I am wrong. but isn't that the first ever piece from a Vectric employee to grace the Vectric forum ? Looks great.
Glad to see that Shopbot getting used :P
calgrdnr
Vectric Wizard
 
Posts: 961
Joined: Tue Mar 20, 2007 6:29 am
Location: Visalia, Ca
Model of CNC Machine: ShopBot prt with 4g upgrade

Re: "You've Captured My Heart" - Vectric Project - FREE to all

Postby sawmiller » Mon Feb 14, 2011 1:14 pm

most excellent shadow, glad to see you put the downgrade to use
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn
User avatar
sawmiller
Vectric Wizard
 
Posts: 436
Joined: Sat May 03, 2008 8:34 pm
Location: camden,tn
Model of CNC Machine: joe's rack and pinion hybrid

Re: "You've Captured My Heart" - Vectric Project - FREE to all

Postby BrianM » Mon Feb 14, 2011 1:29 pm

calgrdnr wrote:Great work guys.

Brian, correct me if I am wrong. but isn't that the first ever piece from a Vectric employee to grace the Vectric forum ? Looks great.
Glad to see that Shopbot getting used :P


Hi Kent,

We posted a fair bit of stuff when we first started, mostly cut on a Roland EGX 600 we had on loan at that time. Since then we've enjoyed sitting back and seeing what you guys post :-). I have a couple of other projects I posted on the Beta forum last year, I'll post those up here too.

My wife loved it, though she didn't have it for long as I've brought it into the office this morning to show everyone :D . I've been warned that I need to bring it home tonight though ...


Brian
Brian Moran
Managing Director
Vectric Ltd.
User avatar
BrianM
Vectric Staff
 
Posts: 1957
Joined: Mon May 16, 2005 10:15 am
Location: Redditch U.K

Re: "You've Captured My Heart" - Vectric Project - FREE to all

Postby mtylerfl » Mon Feb 14, 2011 2:47 pm

myshadowboxes wrote:Thanks for the 2.5 downgrade : ) Wife is leaving for business early tomorrow so we exchanged gifts tonight. I did one for her and one for my daughter. I am so in with both of them right now : )


Wow! I love the Oak! Excellent!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
User avatar
mtylerfl
Vectric Wizard
 
Posts: 3160
Joined: Thu Jan 29, 2009 3:54 am
Location: Brunswick, GA
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha

Re: "You've Captured My Heart" - Vectric Project - FREE to all

Postby Gerry Perrault » Tue Feb 15, 2011 12:38 am

Hi to all
I did make the''ycmh'' project ,but used MDF for a trial,that was the only thing i had on hand.I did a french version of it,and a friend of mine bought it. The next one would be done with real wood,probably oak.Thank you again Mr.Tyler
Gerry
Attachments
tu as capture mon coeur.jpg
french version
I rather be the leader,than the follower
Gerry Perrault
Vectric Apprentice
 
Posts: 73
Joined: Thu Mar 13, 2008 11:04 pm
Location: Granby,Qc, Canada

Re: "You've Captured My Heart" - Vectric Project - FREE to all

Postby mtylerfl » Tue Feb 15, 2011 2:45 am

Gerry, I love your idea of the various language translations. Came out really great...and you sold one to boot! Good job!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
User avatar
mtylerfl
Vectric Wizard
 
Posts: 3160
Joined: Thu Jan 29, 2009 3:54 am
Location: Brunswick, GA
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha

Re: "You've Captured My Heart" - Vectric Project - FREE to a

Postby lwarnell01 » Fri Mar 16, 2018 12:54 am

Good evening I'm trying to figure out why during the roughing section of the project I get 58% completed and then machine just bores through the project board, spoilboard and cnc table bed! :( I'm using a Shark hd4 cnc with Aspire. thanks
lwarnell01
 
Posts: 1
Joined: Sun Feb 18, 2018 7:20 am
Model of CNC Machine: Shark HD4

Re: "You've Captured My Heart" - Vectric Project - FREE to a

Postby mtylerfl » Fri Mar 16, 2018 1:08 am

Electrical interference from a vacuum? Failure of the Shark's controller? Bit loosened and slipped out down from collet? Lots of possibilities to consider and check.

Sorry to hear about the disaster!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
User avatar
mtylerfl
Vectric Wizard
 
Posts: 3160
Joined: Thu Jan 29, 2009 3:54 am
Location: Brunswick, GA
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha

Re: "You've Captured My Heart" - Vectric Project - FREE to a

Postby rcastrap » Fri May 18, 2018 3:21 pm

“I get 58% completed and then machine just bores through the project board, spoilboard and cnc table bed!”.

This happened to me once with the Shark’s little brother, Pirhana on a different project. I could read that there was nothing wrong with the GCode, so I ran the project again and it was fine. I can only think it is inadequate shielding of the cables to the stepper motors.
rcastrap
 
Posts: 12
Joined: Thu Jul 27, 2017 5:23 am
Location: Imperial, California
Model of CNC Machine: Piranha & Axiom

Previous

Return to Aspire - Gallery

Who is online

Users browsing this forum: No registered users and 15 guests