Michael's Paradise Box project ROCKS!

This is the place to post images of work produced using Aspire

Re: Michael's Paradise Box project ROCKS!

Postby CarveOne » Tue Jul 16, 2019 4:08 pm

And here is yet another variation that might be used sometime. Just loving to play with the Aspire software. :wink:

CarveOne
Attachments
Paradise Box Tray - 12 Clipped Ellipse Pockets 3D.jpg
CarveOne
http://www.carveonecncwoodcraft.com
CarveOne
Vectric Wizard
 
Posts: 1330
Joined: Sun Nov 28, 2010 5:10 pm
Location: Eastern NC, USA
Model of CNC Machine: Home built designs - 3'x4' and 5'x12'

Re: Michael's Paradise Box project ROCKS!

Postby SteveNelson46 » Tue Jul 16, 2019 4:52 pm

That's a really clever design. I like it.
Steve
User avatar
SteveNelson46
Vectric Wizard
 
Posts: 510
Joined: Wed Jan 04, 2012 2:43 pm
Location: Tucson, Az.
Model of CNC Machine: Camaster Stinger with Recoil Lathe

Re: Michael's Paradise Box project ROCKS!

Postby CarveOne » Wed Jul 17, 2019 12:50 pm

This Paradise Box was delivered to my wife's cousin Becky last evening. It was kept in a tote bag until time to show it off as something I recently made. It took a few seconds for her to realize that her name was on top, and longer still for her husband to notice that the flower design was just like the chair backrest. Only then did they figure out what this visit was about. We had a lot of fun pulling this one on her. Becky and her husband have never seen anything like this gift before, and are very appreciative of it. Another good deed done ....


CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
CarveOne
Vectric Wizard
 
Posts: 1330
Joined: Sun Nov 28, 2010 5:10 pm
Location: Eastern NC, USA
Model of CNC Machine: Home built designs - 3'x4' and 5'x12'

Re: Michael's Paradise Box project ROCKS!

Postby CarveOne » Tue Jul 23, 2019 1:52 am

Here is an elliptical version of the tray.

CarveOne
Attachments
Paradise Box Tray - 12 Elliptical Pockets 3D.jpg
CarveOne
http://www.carveonecncwoodcraft.com
CarveOne
Vectric Wizard
 
Posts: 1330
Joined: Sun Nov 28, 2010 5:10 pm
Location: Eastern NC, USA
Model of CNC Machine: Home built designs - 3'x4' and 5'x12'

Re: Michael's Paradise Box project ROCKS!

Postby jwoodworke@aol.com » Wed Jul 24, 2019 2:45 am

Now I don't know Becky, but there's sure to be waterworks when she see that keepsake box! Your work on the rocker is beautiful. It has inspired me to work on my grandmother's vanity, which is in terrible shape,
but I believe to be salvageable with a little TLC. BTW, she was born in 1875, and lived most of her life just a little west of your location, in Mebane!!
jwoodworke@aol.com
Vectric Apprentice
 
Posts: 5
Joined: Wed Nov 04, 2015 1:47 am
Model of CNC Machine: DIY CNC router running Cut2D v9.0

Re: Michael's Paradise Box project ROCKS!

Postby CarveOne » Wed Jul 24, 2019 12:53 pm

There are many ways to install the cane weave. Hand lacing, using a woven sheet that you buy by the roll or by the foot, and there are different ways to attach it with a spline or in holes. The easy way is woven sheet and spline. Videos are online that show how. I more or less followed this one.

https://www.youtube.com/watch?v=rDbkIZo6uBM

I like making people happy with the things I can do with the Aspire software. It's a hobby for me, not a business. It's like everything I learned in life has all come together with my CNC hobby work.

CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
CarveOne
Vectric Wizard
 
Posts: 1330
Joined: Sun Nov 28, 2010 5:10 pm
Location: Eastern NC, USA
Model of CNC Machine: Home built designs - 3'x4' and 5'x12'

Re: Michael's Paradise Box project ROCKS!

Postby Lesa Duncan » Fri Aug 23, 2019 2:10 pm

who is Michael who created this file ? It is for sale on etsy and I am pretty sure it is not him selling it. https://www.etsy.com/listing/673286376/ ... ck=1&pro=1
Lesa Duncan
 
Posts: 1
Joined: Thu May 02, 2019 10:43 pm
Model of CNC Machine: AR8 PRO

Re: Michael's Paradise Box project ROCKS!

Postby SteveNelson46 » Fri Aug 23, 2019 5:45 pm

Michael Tyler designs a free project for Vectric every month and they publish the files as a "Project of the Month". You can see all of his projects and many others by just logging into your Vectric portal account. He designed the Paradise Box in March of 2011. I'm not sure but I think the box you see on Etsy is an illegal copy.

https://portal.vectric.com/login
Steve
User avatar
SteveNelson46
Vectric Wizard
 
Posts: 510
Joined: Wed Jan 04, 2012 2:43 pm
Location: Tucson, Az.
Model of CNC Machine: Camaster Stinger with Recoil Lathe

Re: Michael's Paradise Box project ROCKS!

Postby CarveOne » Fri Aug 23, 2019 6:28 pm

If the seller is selling Michael Tyler's original CAD files he is in violation of the User License Agreements. A licensed Vectric software user can download the files and make the Paradise Boxes for sale, but cannot sell or give away the CAD files.

CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
CarveOne
Vectric Wizard
 
Posts: 1330
Joined: Sun Nov 28, 2010 5:10 pm
Location: Eastern NC, USA
Model of CNC Machine: Home built designs - 3'x4' and 5'x12'

Previous

Return to Aspire - Gallery

Who is online

Users browsing this forum: No registered users and 11 guests