Page 1 of 4
Glazing your 3D Carving - A Step by Step Guide
Posted: Sun Sep 27, 2009 7:08 pm
by tmerrill
Hi all,
I have just completed a guide you may find useful if you are interested in finishing your 3D carvings using a glaze to add depth.
The document should open as a .pdf file and allow you to read and/or print.
I hope you find it useful. Any questions, please ask.
Tim
Re: Glazing your 3D Carving - A Step by Step Guide
Posted: Sun Sep 27, 2009 7:18 pm
by Tony Mac
Superb document Tim
Thanks for making the time to do such a comprehensive job
of writing and photographing the process.
Tony
Re: Glazing your 3D Carving - A Step by Step Guide
Posted: Sun Sep 27, 2009 7:33 pm
by GripUs
Thanks, Tim.
Joe
Re: Glazing your 3D Carving - A Step by Step Guide
Posted: Sun Sep 27, 2009 7:46 pm
by Turtle49
Nice Job Tim...
Re: Glazing your 3D Carving - A Step by Step Guide
Posted: Sun Sep 27, 2009 8:09 pm
by calgrdnr
Thanks Tim
Re: Glazing your 3D Carving - A Step by Step Guide
Posted: Sun Sep 27, 2009 8:27 pm
by cabnet636
wow!! lookin forward to seeing this on friday!!
jim
Re: Glazing your 3D Carving - A Step by Step Guide
Posted: Sun Sep 27, 2009 9:37 pm
by maloneyandco
How great is that!!!
Thank you for your time & effort
Rob
Re: Glazing your 3D Carving - A Step by Step Guide
Posted: Sun Sep 27, 2009 9:43 pm
by Phil
Nice job, Tim. You obviously put a good deal of time and effort into producing this document. You are definitely one of the people who makes this forum a great forum.
Thanks,
Phil
Re: Glazing your 3D Carving - A Step by Step Guide
Posted: Sun Sep 27, 2009 9:47 pm
by Adrian
Cheers Tim. Good job.
Re: Glazing your 3D Carving - A Step by Step Guide
Posted: Mon Sep 28, 2009 12:15 am
by Paul_n
Thanks Tim.....
Great Job !!
Your going to be a 'hard act' to follow !!!
C-ya Friday !!
Paul N
Re: Glazing your 3D Carving - A Step by Step Guide
Posted: Mon Sep 28, 2009 1:09 am
by Fleming
Fantastic job - been needing that! Thanks so much.
Paul
Re: Glazing your 3D Carving - A Step by Step Guide
Posted: Mon Sep 28, 2009 2:17 am
by gbanet
Thanks Tim, great info!
Greg
Re: Glazing your 3D Carving - A Step by Step Guide
Posted: Mon Sep 28, 2009 3:08 am
by Bob_S
Tim;
Nice Job
you certainly put a lot of work into this.
Now if the BBQ is this good this coming weekend might just last till Tuesday!!
thanks
Bob
Re: Glazing your 3D Carving - A Step by Step Guide
Posted: Mon Sep 28, 2009 3:56 am
by gravirozo
hello
great establish...should has a separated index on the forum for similar...
thanks
viktor
i'm not the finisher guy... i just like to carving... afternoon was not posted the pdf yet...
Re: Glazing your 3D Carving - A Step by Step Guide
Posted: Mon Sep 28, 2009 6:29 pm
by ssflyer
Great job, Tim!
Thanks for the time and effort you put into it!
Ron