I have a corbel made in autocad that we need to cut two straight lines up the front using a 3/4" ballnose. I'm not sure how to do this. Any suggestions?
Thanks
cutting a straight line on a curved corbel
Re: cutting a straight line on a curved corbel
Hi Brad,
You could try using the Profile toolpath with Project Toolpath onto 3D Model selected.
This will machine at constant depth over the face of the 3D corbel.
Tony
You could try using the Profile toolpath with Project Toolpath onto 3D Model selected.
This will machine at constant depth over the face of the 3D corbel.
Tony
Re: cutting a straight line on a curved corbel
Yes, that worked. Thanks