Page 1 of 2
Lesson in Two Rail Sweeps
Posted: Wed Jan 21, 2009 9:16 pm
by Fleming
In designing a sign I figured out a technique to "precision" fit two shapes together using the two-rail sweep tools. I have attached it here as a pdf lesson in case it might help someone else. Be glad to answer any questions about it. Many thanks to all on this forum who have taught me so much! (Be glad to furnish the .crv3d file if wanted).
Fleming
Re: Lesson in Two Rail Sweeps
Posted: Wed Jan 21, 2009 9:48 pm
by Rcnewcomb
Thanks for taking the time and patience to lay it all out.
Re: Lesson in Two Rail Sweeps
Posted: Thu Jan 22, 2009 4:56 pm
by Tony Mac
Excellent tutorial Fleming and thank you for taking the time to document
the complete process so thoroughly.
We are looking at adding a 'Technical Archive' section to the Forum and this
type of project will be perfect.
Thanks again for sharing your work.
Tony
Re: Lesson in Two Rail Sweeps
Posted: Thu Jan 22, 2009 5:02 pm
by Adrian
Missed this first time around. Great work!
Re: Lesson in Two Rail Sweeps
Posted: Thu Jan 22, 2009 8:57 pm
by JamesB
I second Tony's comments, lots of work involved in a document like this, well done!
Re: Lesson in Two Rail Sweeps
Posted: Fri Jan 23, 2009 1:21 am
by Fleming
Thanks for the kind words!
I actually enjoy technical writing. If there are other topics which may be of help to anyone I'd be glad to take a stab at it. Can't get out to the shop much till winter is over.
Re: Lesson in Two Rail Sweeps
Posted: Tue Oct 05, 2010 1:59 am
by George Kelly
Fleming wrote:In designing a sign I figured out a technique to "precision" fit two shapes together using the two-rail sweep tools. I have attached it here as a pdf lesson in case it might help someone else. Be glad to answer any questions about it. Many thanks to all on this forum who have taught me so much! (Be glad to furnish the .crv3d file if wanted).
Fleming
Hello,
I went through your tutorial and after several mistakes, I managed to compete it, but I would be interested in you posting the .crv3d file.
George Kelly
Re: Lesson in Two Rail Sweeps
Posted: Tue Oct 05, 2010 1:58 pm
by Fleming
George,
File is too large to post but I might could send it direct to you. It is my understanding that the new version of Aspire which will be released soon has soon new tools for doing two rail sweeps. What they have added will probably be a lot easier and better!
Paul
Re: Lesson in Two Rail Sweeps
Posted: Tue Oct 05, 2010 8:14 pm
by George Kelly
Paul,
Thanks anyway. Your Tutorial gave me some new ideas to try using the current version of Aspire.
I can hardly wait for Ver 3.0
George
Re: Lesson in Two Rail Sweeps
Posted: Tue Dec 03, 2013 6:48 pm
by youme
would appreciate the crv file.thanks
american_outsourced@yahoo.com
Re: Lesson in Two Rail Sweeps
Posted: Wed Dec 04, 2013 2:11 am
by Fleming
Youme,
I have sent the Aspire file to your email address as it is too large to post here. Hope it helps. Keep in mind that the Rail Sweep tool has been improved since that lesson.
Hope it helps.
Paul Fleming
Re: Lesson in Two Rail Sweeps
Posted: Mon Dec 12, 2016 8:16 pm
by Creation in Wood
Re: Lesson in Two Rail Sweeps
Posted: Mon Dec 12, 2016 9:46 pm
by Creation in Wood
Can you send me the Aspire .CRV3d file?
pinneydoug@gmail.com
Re: Lesson in Two Rail Sweeps
Posted: Tue Dec 13, 2016 1:54 am
by Fleming
Sorry but that file is "gone" - changed computers several times since that posting. I posted a more up-to-date technique for using 2-rail sweeps to create 3D buildings at:
http://forum.vectric.com/viewtopic.php? ... rn#p180153
All the files for that lesson can be downloaded at my DropBox site:
https://www.dropbox.com/sh/ccj2azlchd3u ... iin-a?dl=0
Good luck.
Re: Lesson in Two Rail Sweeps
Posted: Tue Dec 13, 2016 3:12 am
by Fleming
Found the files for the lesson in creating 3D log cabin shape using 2 rail sweeps and bitmaps for textures.
They can be accessed in my Dropbox folder:
https://www.dropbox.com/sh/nvmab3dugv5z ... Szc9a?dl=0