Hi
I have been playing around with Aspire for some days now and i like it
My problem is that i ordered the wrong tool for the 3D work
So I have been wating for days now for the mailman to bring me the right 1/8" ballnose endmill so I can get my ideas into the wood
While waiting I have been playing around with different home cooked alternatives
So I was thinking that maybe there was other in need of a useable tool for 3D work?
I simply rounded the tip on a 90 degree V-Tool bit with my electric grinder and sharpened it with my diamand hand tool
On the pictures you see a test where i cut the horse. It's 5mm deep and i cut it with 5% overlap
What you see on the pictures is before any sanding
Tool bit for 3D in Aspire
- Pilotfromdk
- Vectric Apprentice
- Posts: 95
- Joined: Tue Jun 05, 2007 10:03 pm
- Model of CNC Machine: The Green Concrete Monster +2000Kg
- Location: Denmark
- Contact:
Tool bit for 3D in Aspire
Regards
Borge
Homepage: www.WoodSign.dk
FaceBook : https://fb.me/woodsign.dk
Borge
Homepage: www.WoodSign.dk
FaceBook : https://fb.me/woodsign.dk
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: Tool bit for 3D in Aspire
onsrud makes the 77-102/104 ballnose bits with taper
https://www.onsrud.com/xdoc/TaperBits
also here
http://www.centuriontools.com/router_bi ... ONSword=ww&
the 1/16 taper bits
http://beckwithdecor.com/index_files/Cutters.htm
https://www.onsrud.com/xdoc/TaperBits
also here
http://www.centuriontools.com/router_bi ... ONSword=ww&
the 1/16 taper bits
http://beckwithdecor.com/index_files/Cutters.htm