Best way to engrave stainless steel

This section is for useful tips and tricks for Aspire

Best way to engrave stainless steel

Postby mark-s » Fri Mar 15, 2019 10:29 pm

Need info about engraving stainless steel.
What bit to use?
Depth of engrave.
Speeds and feed?
Any other tips.
Thanks
mark-s
mark-s
Vectric Apprentice
 
Posts: 188
Joined: Sat Feb 03, 2018 2:03 am
Location: So. Cal.
Model of CNC Machine: diy 4 X 4 CNC Router

Re: Best way to engrave stainless steel

Postby Mobius » Fri Mar 15, 2019 11:43 pm

Spring loaded diamond drag bit is what I'd use.
Connor Bredin
Distinctive Dimensional Concepts Ltd.
www.distinctive-concepts.ca
Mobius
Vectric Wizard
 
Posts: 406
Joined: Wed Jul 09, 2014 1:19 am
Location: Drumheller, Alberta, Canada
Model of CNC Machine: CRP Pro 4848 Custom Build

Re: Best way to engrave stainless steel

Postby Tailmaker » Sat Mar 16, 2019 12:28 am

Mobius wrote:Spring loaded diamond drag bit is what I'd use.


Agree. I tried to engrave stainless with a flat tip engraving spade bit a couple of times with and without lubricant. Kind of worked but it always looked a bit messy.
The diamond drag bit is much cleaner and faster. However, the lines are extremely fine and e.g. larger text would need something like a pocketing tool path to get a hashed interior.

Here some of my diamond drag experiments on stainless (the golden one is also stainless with some plating):

DSC01440.JPG


DSC01405.JPG


I used a homemade sping loaded drag bit holder with a 1/4" linear ball bearing (inside the big tube). Held in the non-rotating spindle and works quite well.

DSC01446.JPG


DSC01441.JPG
Tailmaker
Vectric Apprentice
 
Posts: 247
Joined: Sun Jun 16, 2013 4:40 am
Location: Pasadena, CA
Model of CNC Machine: Home Built 4-axis Router

Re: Best way to engrave stainless steel

Postby martin54 » Sat Mar 16, 2019 12:29 pm

It really dpends what you are trying to achieve, a drag bit will mark it but as tailmaker says the lines are very fine, even with more than one pass, you may get better results if you beef the spring up in the holder :lol: :lol:

Main problems with using a rotating bit are rigidity & spindle speed, Mills are a lot more rigid than routers & have much slower speed spindles which is why people tend to use them for this sort of work :lol: :lol:
User avatar
martin54
Vectric Wizard
 
Posts: 4663
Joined: Fri Nov 09, 2012 2:12 pm
Location: Crossgates, Scotland
Model of CNC Machine: Gerber System 48 (modified)


Return to Aspire - Tips and Tricks

Who is online

Users browsing this forum: No registered users and 6 guests