tracing and digitizing an old diagram for plasma cut

This section is for useful tips and tricks for Aspire
Post Reply
stankern
Vectric Wizard
Posts: 669
Joined: Tue Nov 27, 2007 3:21 pm
Location: ontario canada

tracing and digitizing an old diagram for plasma cut

Post by stankern »

plasma cut of a horse and plough


using the high accuracy drawing board vi to trace out and digitize
an old diagram for a plasma cut
Attachments
net1.jpg
net2.jpg
net3.jpg
net4.jpg
dxf file pic.JPG

User avatar
dhellew2
Vectric Wizard
Posts: 1322
Joined: Thu May 22, 2008 10:14 pm
Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
Location: Royal City Washington

Re: tracing and digitizing an old diagram for plasma cut

Post by dhellew2 »

Lookin' good.
plasma art end of trail.jpg
I cut these from Baltic birch plywood then paint them with Rustoleum metalic look paints.
Dale
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale

stankern
Vectric Wizard
Posts: 669
Joined: Tue Nov 27, 2007 3:21 pm
Location: ontario canada

Re: tracing and digitizing an old diagram for plasma cut

Post by stankern »

Great stuff

Post Reply