Can anyone tell me the best cutting settings 3/8 inch single flute milling speeds and feeds for acrylic.
Pocket and profile cut
Thanks
mark-s
3/8 inch milling speeds and feeds for acrylic
- adze_cnc
- Vectric Wizard
- Posts: 4329
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008
- Location: Vancouver, BC, Canada
Re: 3/8 inch milling speeds and feeds for acrylic
Checking the last time I used a 3/8" bit on acrylic I find:
Bit: Onsrud 63-733
Flutes: 1
RPM: 18,000
Speed: 180 inches/minute
Depth of cut: 3/16 inch
Spindle: 5hp
It was a roughing pass for a 3D model. Onsrud suggests a 0.010 to 0.012 inch chipload for this cutter and that combination of speed and RPM should be 0.010 inch.
Hope this is a start. Really you should find the chipload for your particular bit and material then slot that into a chipload caclulator.
Steven
Bit: Onsrud 63-733
Flutes: 1
RPM: 18,000
Speed: 180 inches/minute
Depth of cut: 3/16 inch
Spindle: 5hp
It was a roughing pass for a 3D model. Onsrud suggests a 0.010 to 0.012 inch chipload for this cutter and that combination of speed and RPM should be 0.010 inch.
Hope this is a start. Really you should find the chipload for your particular bit and material then slot that into a chipload caclulator.
Steven