Rolling the edge of a patch
Rolling the edge of a patch
I am making a patch for a friend of mine, and I was wondering how to make the edges of the vector rolled around the edges?
- Attachments
-
- sos1%.jpg (2.03 KiB) Viewed 1278 times
- dhellew2
- Vectric Wizard
- Posts: 1326
- Joined: Thu May 22, 2008 10:14 pm
- Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
- Location: Royal City Washington
Re: Rolling the edge of a patch
The easiest and fastest way is use a plunge profile round over bit. Draw a vector around the patch allowing for the desired radius then cut on the line using the profile cut. Dale
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale
Young = time, no money
Old = money, no time
Dale
Re: Rolling the edge of a patch
Thank you for the quick reply.
- dhellew2
- Vectric Wizard
- Posts: 1326
- Joined: Thu May 22, 2008 10:14 pm
- Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
- Location: Royal City Washington
Re: Rolling the edge of a patch
Thanks you for asking the question. We all learn from each other.
I should have added; when the edge is textured such as it would be if it were embroidered patch create an outline of the patch and the profile cut will resemble the texture rather than just be a straight round-over cut. Dale
Such as; zoom in and see the edge of the oreo
I should have added; when the edge is textured such as it would be if it were embroidered patch create an outline of the patch and the profile cut will resemble the texture rather than just be a straight round-over cut. Dale
Such as; zoom in and see the edge of the oreo
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale
Young = time, no money
Old = money, no time
Dale