going fro ma shopbot to a big boy machine.

This section is for useful tips and tricks for Aspire

going fro ma shopbot to a big boy machine.

Postby knighttoolworks » Mon May 09, 2016 12:07 am

been using my shopbot for 8 years. I have a chance to run a laguna machine brand new with a 8 tool changer and a 12hp spindle and a huge vac setup. plus waterjet. using aspire on the laguna will make life much easier and shorten the learning curve. I just need to learn how the machine operates. I use so many different bits on the shopbot from 1/16" to 1" and the 1/16" to 1/2" I have up and downcut straight and bullnose and o-flute lost f other bits too. but the big machine mostly will be split wood and plywood and inlaying metal into the plywood. I need to learn how practical it is to use bits not in the tool changer how fast it can cut practically as solid wood is not going to cut as fast as plywoods. anyone have any tips or idea's?
knighttoolworks
Vectric Wizard
 
Posts: 734
Joined: Sat Aug 18, 2007 5:19 am
Location: portland oregon
Model of CNC Machine: shobot 48x96

Return to Aspire - Tips and Tricks

Who is online

Users browsing this forum: No registered users and 4 guests