More new models
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
More new models
I call this "The Hunter".
I'm thinking about putting it out for sale...
Michael
I'm thinking about putting it out for sale...
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: More new models
Thanks,
I'm going to cut it today....let's see if it's any good after that..
Michael
I'm going to cut it today....let's see if it's any good after that..
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: More new models
Great modelling as always, Michael.
However, I can't quite put my finger on it but there is something about the top part that jumps out on me as looking wrong.
However, I can't quite put my finger on it but there is something about the top part that jumps out on me as looking wrong.
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: More new models
I think I know what it is, I have always seen falcons with the head high and alert like this one.
First time I have seen it with the head low as this one
First time I have seen it with the head low as this one
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: More new models
Here's a copy of the original artwork by my friend, Judson Portzer.
It was an illustration for a Children's book.
I really don't like changing the design from the artist intent...
Maybe on the next one I extend the neck.
Thanks for posting the additional pictures.
Michael
It was an illustration for a Children's book.
I really don't like changing the design from the artist intent...
Maybe on the next one I extend the neck.
Thanks for posting the additional pictures.
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: More new models
You are welcome, my friend.
I totally agree with you, it just caught me by surprise and even more to see a photo of one with the head low.
I wasn't criticizing
I totally agree with you, it just caught me by surprise and even more to see a photo of one with the head low.
I wasn't criticizing
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: More new models
Ms.Wolffie, ( that sounds so classy )
It wasn't taken as criticism...
I've learned a long time ago when I started my stained glass studio that once you put your work out in the public, you'd better be ready for comments.
Of course we all like good responses but people try to help and it's not always accepted with the same intent of the viewer.
Just like my previous posting of the three horses.
I would have never seen the mistake without another ( several ) sets of eyes looking it over.
So, not to worry, I'm always looking for ways to improve,,I have a long way to go before I'm finished.
All the best,
Michael
It wasn't taken as criticism...
I've learned a long time ago when I started my stained glass studio that once you put your work out in the public, you'd better be ready for comments.
Of course we all like good responses but people try to help and it's not always accepted with the same intent of the viewer.
Just like my previous posting of the three horses.
I would have never seen the mistake without another ( several ) sets of eyes looking it over.
So, not to worry, I'm always looking for ways to improve,,I have a long way to go before I'm finished.
All the best,
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: More new models
Nah, I just got tired of being presumed to be a hemezalick wrote:Ms.Wolffie, ( that sounds so classy )
Michael
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: More new models
Ms Wolffie wrote:Nah, I just got tired of being presumed to be a hemezalick wrote:Ms.Wolffie, ( that sounds so classy )
Michael
I still like it...
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
- SteveNelson46
- Vectric Wizard
- Posts: 2310
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: More new models
I don't blame you for not wanting to change from the artists original. However, the head looks a little squashed and pointed. Almost like an owl.mezalick wrote:Here's a copy of the original artwork by my friend, Judson Portzer.
It was an illustration for a Children's book.
I really don't like changing the design from the artist intent...
Maybe on the next one I extend the neck.
Thanks for posting the additional pictures.
Michael
Steve
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: More new models
Michael,
Actually thought it was an Owl too(Kinda neat...and maybe Falconry for the day shift?
UNTIL Wolffie posted the pics...and then embarrassed I got it wrong
Beautiful work as always!
scott
Actually thought it was an Owl too(Kinda neat...and maybe Falconry for the day shift?
UNTIL Wolffie posted the pics...and then embarrassed I got it wrong
Beautiful work as always!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: More new models
Here's a finished look...
14" x 19" x .75"
Quartersawn white oak with stain and shellac
Michael
14" x 19" x .75"
Quartersawn white oak with stain and shellac
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: More new models
That came out beautiful, Michael!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC