Found this on youtube:
https://www.youtube.com/watch?v=hT6Ow_cBTps
I can see all sorts of vessels that have been engraved first.
Set of containers for the kitchen?
Accessories for the desk?
Acrylic Fishtank?
etc. etc.
Cheers
Woffie
Welding Plexi etc.
-
Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Welding Plexi etc.
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
-
wonderpilot
- Posts: 48
- Joined: Tue Jan 26, 2010 4:12 pm
- Model of CNC Machine: CNC Shark, WoodcarverCNC 24x39
- Location: White Cloud, Michigan USA
Re: Welding Plexi etc.
I've used this stuff to make up brochure holders. It really works well. Just make sure not to leave any gaps.
Also would work good for plexi dust boxes for the cnc!
wonderpilot
Also would work good for plexi dust boxes for the cnc!
wonderpilot
-
martin54
- Vectric Archimage
- Posts: 7354
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Welding Plexi etc.
I use Penloc for most of my acrylic & other plastic bonding. Penloc 1:1 for general use & GT clear for clear acrylic as it is optically clear.
Quite fancied trying their uv adhesives but the uv lamp is an expensive bit of kit for my small needs.
Quite fancied trying their uv adhesives but the uv lamp is an expensive bit of kit for my small needs.