vector missing or ignored ! ?

This section is for useful tips and tricks for Aspire
Post Reply
mihai
Posts: 18
Joined: Tue Apr 27, 2010 7:17 pm

vector missing or ignored ! ?

Post by mihai »

Hi,

I did some complex vectorized drawing and when I tried to create shape from vectors, it not show up all forms.
I can say that "Create shape from vectors" command ignore a few vectors. Vectors was created one by one, are close vectors and
is created a group with all of them under the same layer.

Anybody can help me ?

Thank you,
Mihai

User avatar
Adrian
Vectric Archimage
Posts: 14544
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: vector missing or ignored ! ?

Post by Adrian »

Very hard to say without seeing the file. If it's legal to do so could you attach the CRV3D file from Aspire? If not some screenshots would help.

mihai
Posts: 18
Joined: Tue Apr 27, 2010 7:17 pm

Re: vector missing or ignored ! ?

Post by mihai »

OK,

I did two screenshots.
The missing vectors are in the "halo" model (no on the face or hair).

Thank you,

Mihai
Attachments
A.jpg
B.jpg

kilrabit
Vectric Wizard
Posts: 498
Joined: Thu Feb 26, 2009 4:04 am
Location: Uvalde Texas

Re: vector missing or ignored ! ?

Post by kilrabit »

make sure you do not have duplicate vector at the outer ring area, you might be picking up a duplicate, or sharing the same curvature line. You might choose the check for duplicate vectors, or choose your complete design and move it to another layer and make it not visible and see what you have left, then look at the new layer by itself and see what you actually have.




Roy

mihai
Posts: 18
Joined: Tue Apr 27, 2010 7:17 pm

Re: vector missing or ignored ! ?

Post by mihai »

Thank you , I will !

Mihai

tmerrill
Vectric Wizard
Posts: 4797
Joined: Thu May 18, 2006 3:24 pm
Model of CNC Machine: ShopBot
Location: North Carolina

Re: vector missing or ignored ! ?

Post by tmerrill »

I know you said the vectors were all closed shapes, that that would be the most probable cause. Realize that grouping vectors does not make them closed shapes.

Have you ungrouped all vectors and selected the missing ones one at a time, then press the J key to open the Join Vectors tool to see if they are really closed? It may be worth doing a second check.

Tim

rrrevels
Vectric Craftsman
Posts: 254
Joined: Thu May 28, 2009 3:08 pm
Location: Pensacola, Fl

Re: vector missing or ignored ! ?

Post by rrrevels »

Since the shape on the left works and the ones on the top and right don't I would copy the left one to the other locations and see if that corrects the problem. A mirror copy would take care of the right side.

Russ
CAMaster MC3050-R w/steppers and Mach3, Aspire 8.02 D&C Series 1A &1B - Wildlife Scenes

mihai
Posts: 18
Joined: Tue Apr 27, 2010 7:17 pm

Re: vector missing or ignored ! ?

Post by mihai »

Hi,

Thanks to you guys, I solve my problem.
I will pay more attention in future on closing vectors.

Pictures are relevant,
Thank you,
Mihai
Attachments
C.jpg
D.jpg
E.jpg
F.jpg

Post Reply